User`s manual

Compliance Certification Services Inc.
Report No：T11112830801-LV
IEC/EN 60950-1
Clause Requirement - Test Result - Remark Verdict
Page 24 of 72
L.2 Adding machines and cash registers N
L.3 Erasers N
L.4 Pencil sharpeners N
L.5 Duplicators and copy machines N
L.6 Motor-operated files N
L.7 Other business equipment Max. normal load operation. P
M ANNEX M, CRITERIA FOR TELEPHONE RINGING SIGNALS (see 2.3.1) N
M.1 Introduction N
M.2 Method A N
M.3 Method B N
M.3.1 Ringing signal N
M.3.1.1 Frequency(Hz) ……………….……………….. : N
M.3.1.2 Voltage(V) …………………………….…….… : N
M.3.1.3 Cadence; time(s), voltage(V) ……….……..… : N
M.3.1.4 Single fault current (Ma) …………………..….. : N
M.3.2 Tripping device and monitoring voltage …: N
M.3.2.1
Conditions for use of a tripping device or a
monitoring voltage
N
M.3.2.2 Tripping device N
M.3.2.3 Monitoring voltage (V) ……….……………..…. : N
N
ANNEX N, IMPULSE TEST GENERATIORS(see 1.5.7.2, 1.5.7.3, 2.10.3.9, 6.2.2.1,
7.3.2, 7.4.3 and Clause G.5)
N
N.1 ITU-T impulse test generators N
N.2 IEC 60065 impulse test generators N
P ANNEX P, NORMATIVE REFERENCES P
Q ANNEX Q, Voltage dependent resistors (VDRs)(see 1.5.9.1) N
a)preferred climatic categories N
b)Maximum continuous voltage N
c)Pulse current N