User`s manual

Compliance Certification Services Inc.
Report No：T11112830801-LV
IEC/EN 60950-1
Clause Requirement - Test Result - Remark Verdict
Page 20 of 72
Current limiting method
─
7 CONNECTION TO CABLE DISTRIBUTION SYSTEMS N
7.1 General N
7.2 Protection of cable distribution system service
personnel, and users of other equipment
connected to the system, from hazards voltage
in the equipment.
N
7.3 Protection of equipment users from
overvoltages on the cable distribution system
N
7.4 Insulation between primary circuits and cable
distribution system
N
7.4.1 General
─
7.4.2 Voltage surge test
─
7.4.3 Impulse test
─
A ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE N
A.1
Flammability test for fire enclosures of movable equipment having a total mass
exceeding 18 kg, and of stationary equipment(see 4.7.3.2)
N
A.1.1 Samples N
Wall thickness(mm) …………………………… : ─
A.1.2 Conditioning of samples; temperature(℃) …. : N
A.1.3 Mounting of samples ……………………….… : N
A.1.4 Test flame(see IEC 60695-11-3) N
Flame A, B, C or D ─
A.1.5 Test procedure N
A.1.6 Compliance criteria N
Sample 1 burning time(s) ……………………. : ─
Sample 2 burning time(s) ………………..….. : ─
Sample 3 burning time(s) ………………..….. : ─
A.2
Flammability test for fire enclosures of movable equipment having a total mass not
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
N
A.2.1 Samples material N
Wall thickness(mm) ………………………….. : ─
A.2.2 Conditioning of samples; temperature(℃) … : N
A.2.3 Mounting of samples …………………….….. : N
A.2.4 Test flame(see IEC 60695-11-4) N