User`s manual

Compliance Certification Services Inc.
Report No：T11112830801-LV
IEC/EN 60950-1
Clause Requirement - Test Result - Remark Verdict
Page 13 of 72
3.1.1 Current rating and overcurrent protection All internal wires are UL recognized wiring
which is PVC insulated, rated VW-1, min.
80°C. Internal wiring is PVC insulated, the
wiring gauge is suitable for current
intended to be carried.
P
3.1.2 Protection against mechanical damage Class III equipment. N
3.1.3 Securing of internal wiring Class III equipment. N
3.1.4 Insulation of conductors Class III equipment. N
3.1.5 Beads and ceramic insulators Not used. N
3.1.6 Screws for electrical contact pressure No such screws used. N
3.1.7 Insulation materials in electrical connections No contact pressure through insulating
material.
P
3.1.8 Self-tapping and spaced thread screws No self-tapping or spaced thread screw. P
3.1.9 Termination of conductors Class III equipment. N
10N pull test N
3.1.10 Sleeving on wiring No sleeving used. N
3.2 Connection to a main supply
Class III equipment, not connect to the mains supply.
N
3.2.1 Means of connection N
3.2.1.1 Connection to an a.c. mains supply N
3.2.1.2 Connection to a d.c. mains supply N
3.2.2 Multiple supply connections N
3.2.3 Permanently connected equipment N
Number of conductors, diameter (mm) of cable
and conduits
─
3.2.4 Appliance inlets N
3.2.5 Power supply cords N
3.2.5.1 AC Power supply cords N
Type
─
Rated current (A), cross-sectional area (mm
²
),
AWG
─
3.2.5.2 DC Power supply cords
N
3.2.6 Cord anchorages and strain relief N
Mass of equipment (kg), pull (N)
─
Longitudinal displacement (mm)
─
3.2.7 Protection against mechanical damage N
3.2.8 Cord guards N
Diameter or minor dimension D (mm); test mass
(g)
─
Radius of curvature of cord (mm)
─
3.2.9 Supply wiring space N
3.3 Wiring terminals for connection of external conductors
Class III equipment.
N