User`s manual

Compliance Certification Services Inc.
Report No：T11112830801-LV
IEC/EN 60950-1
Clause Requirement - Test Result - Remark Verdict
Page 12 of 72
Electric strength test N
2.10.5.11 Insulation in wound components N
2.10.5.12 Wire in wound components N
Working voltage N
a)basic insulation not under stress N
b)basic supplementary, reinforced insulation N
c)Compliance with Annex U N
Tow wires in contact inside wound
component
；
angle between 45
°
and 90
°
N
2.10.5.13 Wire with solvent-based enamel in wound
components
N
Electric strength test N
Routine test N
2.10.5.14 Additional insulation in wound components N
Working voltage N
-basic insulation not under stress N
-supplementary, reinforced insulation N
2.10.6 Construction of printed boards N
2.10.6.1 Uncoated printed boards N
2.10.6.2 Coated printed boards N
2.10.6.3 Insulation between conductors on the same
inner surface of a printed board
N
2.10.6.4 Insulation between conductors on different
layers of a printed board
N
Distance through insulation N
Number of insulation layers (pcs) N
2.10.7 Component external terminations N
2.10.8 Test on coated printed boards and coated
components
N
2.10.8.1 Sample preparation and preliminary inspection N
2.10.8.2 Thermal conditioning N
2.10.8.3 Electric strength test N
2.10.8.4 Abrasion resistance test N
2.10.9 Thermal cycling N
2.10.10 Test for Pollution Degree 1 environment and
insulation compound
N
2.10.11 Test for semiconductor devices and cemented
joints
N
2.10.12 Enclosed and sealed parts N
3 WIRING, CONNECTIONS AND SUPPLY
P
3.1 General
P