User`s manual

Report No.：T11112830801-RT-1
Page 21 of 48
This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
TEST RESULTS
Power Density
Product Name
Smart 300N Broadband Router
Test By
John Chen
Model
BR485d
Test Date
2011/11/29
Test Mode
IEEE 802.11a
Temp. & Humidity
21.8°C, 55%
Duty Cycle measurement X: (Ton/Ton + Toff) = 1.00
10 * log (1/x) = 0.00 dB
Antenna Gain Chain 0: 4 dBi
TRANSMITTER POWER (dBm)
TEST CONDITIONS
Frequency
(MHz)
Reading
(dBm)
Mean
EIRP
(dBm)
Limit
(dBm)
Margin
(dB)
5180 -12.79 3.51 10 -6.49
T
nom
(20 °C) Vnor 230VAC
5240 -13.55 2.75 10 -7.25
Remark:
1. The cable assembly insertion loss of 12.3 dB (including 10 dB pad + 2.3 dB cable) was Entered as
an offset in the power meter to allow for direct reading of power.
2. Mean EIRP (dBm) = Reading (dBm) + Antenna Gain (dBi) + 10 * log (1/x).
Product Name
Smart 300N Broadband Router
Test By
John Chen
Model
BR485d
Test Date
2011/11/29
Test Mode
IEEE 802.11n HT20
Temp. & Humidity
21.8°C, 55%
Duty Cycle measurement X: (Ton/Ton + Toff) = 1.00
10 * log (1/x) = 0.00 dB
Antenna Gain Chain 0: 4 dBi
TRANSMITTER POWER (dBm)
TEST CONDITIONS
Reading (dBm)
Temperature
(°C)
Voltage
(V)
Frequency
(MHz)
Chain 0 Chain 1
Mean EIRP
(dBm)
Limit
(dBm)
Margin
(dB)
5180 -15.47 -15.22 3.967098603 10 -6.032901397
20°C 230V
5240 -16.32 -15.3 3.530176503 10 -6.469823497
Remark:
1. The cable assembly insertion loss of 16.1 dB (including 10 dB pad + 2.3 dB cable) was Entered as
an offset in the power meter to allow for direct reading of power.
2. Mean EIRP (dBm) = Reading (dBm) + Antenna Gain (dBi) + 10 * log (1/x).