User manual

http://www.sapido.com.tw 27 USER MANUAL V1.0
Select Enable NTP client update to maintain the system time.
4.2.2 LAN Interface Setup
If you are using RB-1732 Broadband Router with multiple PCs on your LAN, you must
connect the LAN via the Ethernet ports on the built-in Ethernet switch. You must assign a
unique IP address to each device residing on your LAN. The LAN IP address identifies the
router as a node on your network; that is, its IP address must be in the same subnet as the
PCs on your LAN. The default LAN IP for the Internet Security Router is 192.168.1.1.
For Gateway IP Address, the IP address 192.168.1.xxx (xxx can be any number between 1
and 254 that is not used by another device.) Please don’t change the default LAN IP settings
at this section until you have completed the rest of the configurations and confirm that your
Internet connection is working.
Click on Next button to proceed.
4.2.3 WAN Setup
The WAN settings can be referred to as the Public setting. All IP information in the WAN
settings is public IP addresses which are accessible on the Internet. RB-1732 Broadband
Router supports 4 interfaces and 4 access types to WAN. Select one of the WAN connection
modes required by your ISP in the following WAN Setup Configuration page, the WAN setup
pages will vary depending on what kind of WAN Type you select.