User manual

http://www.sapido.com.tw 113 USER MANUAL V1.0
2. Q: Web page hangs, corrupt downloads, or nothing but junk characters is being
displayed on the screen. What do I need to do?
A: Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-negotiate"
feature of your NIC as a temporary measure. (Please look at the Network Control
Panel, in your Ethernet Adapter's Advanced Properties tab.)
3. Q: Why can't I connect to the Web Configuration?
A: you can remove the proxy server settings in your web browser.
7.5 RB-1732 Broadband Router Setup
1. Q: Why does RB-1732 Broadband Router’s setup page shut down unexpectedly?
A: If one of the pages appears incompletely in RB-1732 Broadband Router’s setup
pages, please click on Logout item on the Main Menu before shutting it down. Don’t
keep it working. Then, close Internet browser and open it again for going back to the
previous page.
2. Q: Why can’t my USB devices and LAN ports work properly after setting the
DHCP?
A: There are two rules over here.
Rule1: After connecting USB devices, please reboot your Router.
Rule2: Before finishing the DHCP setup, please don’t connect any computer to LAN
ports, because the conflict of having the same IP may occur and cause some
computers a lot of trouble.
※
※※
※ Notice: Make sure that you always click on the Apply button after configuring
each setting. And in order to let other LAN ports work properly, please reboot
your PC.
3. Q: I don’t know how to configure DHCP.
A: DHCP is commonly used in the large local network. It allows you to manage and
distribute IP addresses from 2 to 254 throughout your local network via RB-1732
Broadband Router. Without DHCP, you would have to configure each computer
separately. It’s very troublesome. Please Open Internet browser > Input
192.168.1.1 in the website blank field > Select DHCP Server under the IP Config
Menu. For more information, please refer to 3.3.2 (Router Mode) or 4.3.1 (AP Mode).
4. Q: How do I upgrade the firmware of RB-1732 Broadband Router?