User manual

http://www.sapido.com.tw/ User Manual 1.0
33
Item Description
IP Address
The default IP address is 192.168.1.254
Subnet Mask
Enter the Subnet Mask address.
Default Gateway
Enter the Default Gateway address for LAN interfaces.
DHCP
Select DHCP type: Client, Disable, or Server under different
environment.
DHCP Client Range
When enable DHCP server, you can fill in the start and end IP
address; client will be assigned an IP address from the range.
Static DHCP
When enable DHCP server, you can set static DHCP to a network
device with specified MAC address.
Device Name
Input a name for this router.
802.1d Spanning Tree
Disable or Enable the 802.1d Spanning Tree Protocol (STP).
Clone Mac Address
Some ISPs require MAC address registration. In this case, enter
the MAC address registered to the provider to "Clone MAC
Address".
Apply Change & Reset
Click on Apply Change to save the setting date, or you may click
on Reset to clear all the input data.
3.4 WiFi AP Mode- Using as a wireless AP
Make sure to shift the mode into AP Mode.
The default values for User Name and Password are admin (all in lowercase letters). Click