User manual

http://www.sapido.com.tw/ User Manual 1.0

3.3 AP Mode-Using as a Access Point

Make sure to shift the mode into AP Mode.

Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 10

seconds between power-off / power-on condition.

When this product is used as an access point, the IP address has to be changed.

The

default IP under AP mode is 192.168.1.254.

Setp 1. Open a Web browser, and enter http://192.168.1.254 (Default Gateway) into the

blank.

Setp 2. Enter the User name and Password in to the blank and then Click Login. The

default values for User Name and Password are admin (all in lowercase letters).

Select LAN under the IP Config menu