User manual

http://www.sapido.com.tw/ User Manual v1.0.0

1.4 The Rear Panel

1.4.1 Power Connector

The power connector is designed to be used with the power adapter included in the

product package.

1.4.2 Network Ports

The Switch is equipped with five RJ-45 ports that support network speeds of

10/100Mbps.

1.4.3 Cabling

100Mbps - To transmit at 100Mbps requires Cat. 5 cabling.

10Mbps - When transmitting at 10Mbps, Cat. 3, 4 or 5 TP cabling with RJ-45 sockets

can be used.

Port Type Cable Type Connector

100BASE-TX Cat.5 TP RJ-45

10BASE-T Cat. 3, 4 or 5 TP RJ-45

Note: Cat. 5 TP cable recommended whenever installing new cabling.

1.4.4 QoS Switch

The Switch button can setup two mode of QoS function. You must restart the power

after switch the button

 Normal model

QoS Mode

Switch

Input