User manual

http://www.sapido.com.tw/ User Manual v1.0.0
48
Chapter 7 USB to Ethernet + Wireless AP
7.1 Auto install
HW switch to “USB to Ethernet + Wireless AP” mode and insert it to PC/NB
USB port，it can run auto install process. After that，PC/NB has a USB ethernet
NIC card
7.2 Access internet
Plug in internet cable into BRD70n RJ45 ethernet port，then NB/PC can
access internet，this mode is a USB ethernet card
7.3 If you want to manage BRD70n
Set PC/NB BRD70n NIC card IP as 192.168.1.x，then open brower and type
192.168.1.254。The detail feature please refer BRD70n router mode