User manual

http://www.sapido.com.tw/ User Manual v1.0.0
47
Item
Description
IPSec Pass-through
Internet Protocol Security (IPSec) is a suite of protocols used to
implement secure exchange of packets at the IP layer. To allow
IPSec tunnels to pass through the router, IPSec Pass-through is
enabled by default. To disable IPSec Pass-through , select Disable
PPTP Pass-through
Point-to-Point Tunneling Protocol is the method used to enable
VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP
tunnels to pass through the router, PPTP Pass-through is enabled
by default. To disable PPTP Pass-through, select Disable.
L2TP Pass-through
To allow the L2TP network traffic to be forwarded to its destination
without the network address translation tasks.
IPV6 Pass-through
Allow IPV6 packet to be forwarded to its destination without the
network address translation tasks.
6.6.9 Wan Type Auto Detection