User`s guide

5.
Click OK.
18.2.1.3.2 To create a Report Part Drilldown hyperlink
Note:
Before you begin this procedure, be sure to read Setting up navigation to acquaint yourself with the
limitations of creating this type of hyperlink.
1.
Open a report and select the intended destination object; then click the Format button on the
Expert Tools toolbar.
Tip:
You can also do this by selecting Format Field from the Format menu.
2.
In the Format Editor, click the Hyperlink tab.
3.
In the DHTML Viewer Only area, select Report Part Drilldown.
The "Hyperlink information" area changes to show the fields available for this type of hyperlink.
The Available Fields area shows only the sections and report objects you can select for drill down.
In general, these objects include field objects, charts, maps, bitmaps, cross-tabs, and text objects
contained in the next section down (that is, for example, objects in group two when the object you
selected is in group one).
2012-03-14398
Printing, Exporting, and Viewing Reports