user manual

Preparations
16
Menu settings
5
Sleep setting
You can set the system controller to turn off
automatically if it is not operated for a certain
period of time. When this is done, a moving
“SLEEP MODE” display will appear in the menu
display.
(Default setting: OFF)
1
Move the joystick up or down to
select “7. SLEEP”.
[
ó
ñ
MAIN MENU †]
7.SLEEP: OFF
2
Move the joystick to the left or
right to select the time (Example: 1
(HOUR)).
[
ó
ñ
MAIN MENU í]
7.SLEEP: 1(HOUR)
Available settings:
OFF, 1(MIN), 5(MIN), 10(MIN), 30(MIN),
1(HOUR)
3
Move the joystick up or down to
select “14. SAVE/EXIT”, and then
move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4
Move the joystick to the left or right
to select “YES”, and then press the
ENT button.
[ SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will
return to the initial screen.
When the specified sleep mode is reached,
the following display will appear.
VSP-3000
SLEEP MODE
6
Buzzer setting
This sets the buzzer when the system controller is
operated.
(Default setting: OFF)
1
Move the joystick up or down to
select “8. BUZZER”.
[
ó
ñ
MAIN MENU †]
8.BUZZER: OFF
2
Move the joystick to the left or right
to set the buzzer (Example: ON).
[
ó
ñ
MAIN MENU í]
8.BUZZER: ON
Available settings: ON, OFF
3
Move the joystick up or down to
select “14. SAVE/EXIT”, and then
move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4
Move the joystick to the left or right
to select “YES”, and then press the
ENT button.
[ SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will
return to the initial screen.
01GB_L8CSE_WA_VSP3000.indd 1601GB_L8CSE_WA_VSP3000.indd 16 2008/02/29 13:17:032008/02/29 13:17:03