Instruction Manual

161 English
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
CAMERA
Problem Cause Action
Reference
page
Power
No power. The battery
pack is dead.
Recharge the
battery pack.
18
The battery
pack has not
been inserted
correctly.
Reinsert the
battery pack,
making sure to
orient it
correctly.
The camera
turns off by
itself.
The power
save function
is operating.
Turn on the
camera again. 22
Shooting
An image is
not captured
when the
shutter button
is pressed.
The power is
not turned on.
If the power
save function
was activated,
press one of the
buttons to turn
the camera on
before shooting.
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
22
The maximum
number of
images that
can be
captured or the
maximum
video clip
recording time
has been
reached.
Install a new
card.
16
Erase the
images that are
not necessary.
Save the
images to
separate media,
then erase all
the images from
the card.
93