Instruction Manual

English 94

4 Toggle the SET button up to select “YES”, and press the SET button.

h The currently displayed image is deleted.

h To erase other data, select the data, and press the SET button.

h The Erase Confirmation Screen again appears. To erase the data,

select “YES”, and press the SET button. When data erase is

completed, “NO IMAGE” is shown.

CAUTION

About protected images

i Data which is protected from accidental erase cannot be erased. To erase

protected data, set the protect setting for the data to off (page 91), and

then follow the data erase procedure.

The schedule shot is also erased.

i If captured still images were entered in the schedule, the images will also

be deleted from the schedule when the image data is erased. Please take

note of this especially when choosing the “DELETE ALL” mode.

i You can also access the One Erase Confirmation Screen from the

Playback Screen by toggling the SET button up.