L5AF2_US.book 1 ページ ２００２年１２月２０日 INSTRUCTION MANUAL 金曜日 午後１時４８分 VCC-3944 COLOR CCD camera About this manual Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
L5AF2_US.book 1 ページ ２００２年１２月２０日 金曜日 午後１時４８分 Depending on the conditions of use, installation and environment, please be sure to make the appropriate settings and adjustments. If you need help with installation and/or settings, please consult your dealer. CONTENTS INFORMATION TO USER .................................. 2 PRECAUTIONS .................................................. 3 PARTS NAMES .................................................. 4 MOUNTING THE LENS .....................................
L5AF2_US.book 2 ページ ２００２年１２月２０日 金曜日 午後１時４８分 INFORMATIN TO USER Safety Guard THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT. WARNING: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. For the customers in Canada This Class B digital apparatus complies with Canadian ICES-003.
L5AF2_US.book 3 ページ ２００２年１２月２０日 金曜日 午後１時４８分 PRECAUTIONS ■ In case of problem Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). ■ Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit. For internal settings and repairs, consult your dealer (or a Sanyo Authorized Service Centre).
L5AF2_US.book 4 ページ ２００２年１２月２０日 金曜日 午後１時４８分 PARTS NAMES 1 Flange-back lock screw (LOCK) 2 Flange-back adjustment dial 3 Lens mount cap 2 1 3 4 The cap is installed to protect the lens mount section. Remove the lens mount cap before installing a lens (sold separately). 4 Camera installation bracket The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the longer screws and install the shorter screws on the opposite side to seal the openings.
GB.fm 5 ページ ２００２年１２月２０日 金曜日 午後２時２分 PARTS NAMES 9 5 6 7 5 6 7 8 9 Camera setup section White balance adjustment volume (WB R or B) Line phase adjustment volume (PHASE) Lens iris adjustment volume (LEVEL) Lens iris output connector (LENS) This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens. F Video output connector (VIDEO OUT: BNC type) 8 Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.
L5AF2_US.book 6 ページ ２００２年１２月２０日 金曜日 午後１時４８分 MOUNTING THE LENS Please use a DC type auto-iris lens (sold separately). 1 Check the lens mount Do not use a lens if the length “L” is more than 5 mm. That may damage the camera and prevent proper installation. C mount type lens L 2 1 2 3 2 CS mount type lens 3 Remove the lens mount cap from the camera. Install the auto-iris lens. CS mount type lens Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.
L5AF2_US.book 7 ページ ２００２年１２月２０日 金曜日 午後１時４８分 MOUNTING THE LENS ■ Pin layout 2 1 4 3 1 2 3 4 ■ Flange-back adjustment If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the flange-back position as described below.
L5AF2_US.book 8 ページ ２００２年１２月２０日 金曜日 午後１時４８分 CONNECTIONS 1 24 V AC connection (A) Figure 1 12 V DC connection GND AC24V GND AC24V DC12V DC12V Figure 2 (Video signal connections) : VIDEO IN : VIDEO OUT Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.), AC adaptor and cables are sold separately. 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 Connect the power supply.
L5AF2_US.book 9 ページ ２００２年１２月２０日 金曜日 午後１時４８分 SETTINGS ■ Camera setup section No.
L5AF2_US.book 10 ページ ２００２年１２月２０日 金曜日 午後１時４８分 SETTINGS ■ Iris function setting 1 This should normally be set to the down (AI) position. Use a manual or fixed iris lens and set the lens aperture to the shortest F stop. Set the switch 1 to the up (EI) position. EI When using an auto-iris lens (for indoor/ outdoor use) Set the switch 1 to the down (AI) position.
L5AF2_US.book 11 ページ ２００２年１２月２０日 金曜日 午後１時４８分 SETTINGS ■ Backlight compensation setting 3 4 This camera has two different backlight correction functions: multi-spot photometry (MULTI) and center focus photometry (CENT). The normal setting (switch 3 and 4) is the down position, but you can change the switch 3 or 4 setting in accordance with the backlight conditions.
GB.fm 12 ページ ２００２年１２月２０日 金曜日 午後２時３５分 SETTINGS ■ White balance adjustment 5 Normally the switch 5 is set to the down (ATW: auto white balance) position and the white balance is adjusted automatically. If a manual white balance adjustment is necessary, follow the steps below. Set the switch 5 to the up (MANU) position, then adjust the color. • Turn R to set the red ratio and/or B to set the blue ratio.
L5AF2_US.book 13 ページ ２００２年１２月２０日 金曜日 午後１時４８分 SETTINGS ■ Lens iris adjustment 7 If using a DC type auto-iris lens, you will need to set the LEVEL volume when shooting in the conditions described below. L H LEVEL L (counterclockwise): To decrease the contrast H (clockwise): To increase the contrast • If shooting simultaneously in a dark room and through a bright window. • If the subject background is extremely bright or dark. • If the brightness of the picture on the monitor is not correct.
L5AF2_US.book 14 ページ ２００２年１２月２０日 金曜日 午後１時４８分 TROUBLESHOOTING Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not perform correctly, please consult your dealer or a Sanyo Authorized Service Centre.
L5AF2_US.book 15 ページ ２００２年１２月２０日 金曜日 午後１時４８分 SPECIFICATIONS ■ Camera: Scanning system : NTSC standard (525 TV lines, 30 frames/sec.) Interlace : PLL 2:1 interlace Image device : 1/4 inch solid state image device CCD Picture elements : 537 (H) x 505 (V) Effective picture elements : 510 (H) x 492 (V) Synchronizing system : Internal sync, Line lock manually switchable Resolution : 350 TV lines horizontally, 350 TV lines vertically Video output level : 1.
L5AF2_US.book 16 ページ ２００２年１２月２０日 金曜日 午後１時４８分 SPECIFICATIONS ■ Dimensions 108 1.4 56 99 45 10.7 16 25.8 M6 28 Features and specifications are subject to change without prior notice or obligations.
L5AF2_US.
L5AF2_US.book 2 ページ ２００２年１２月２０日 金曜日 午後１時４８分 SANYO INDUSTRIAL VIDEO COLOR VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
L5AF2_US.book 3 ページ ２００２年１２月２０日 金曜日 午後１時４８分 Printed on recycled paper 1AC6P1P2620-L5AF2/US (0103KPS-CZ) Sanyo Electric Co, Ltd.
