Operation Manual

Kapitel 4 Einstellungen — Menü [NETZWERK]
DEUTSCH - 179
Beispiel einer E-Mail, die bei einem Fehler gesendet wird
Die folgende E-Mail wird gesendet, wenn ein Fehler aufgetreten ist.
=== Panasonic project or report(ERRO R) ===
Project or T ype : RZ12K
Serial No : 123456789012
----- check system -----
MAIN CPU BUS [ FAILED ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
EXHAUST AIR TEMPERATURE [ OK ]
LD1 TEMPERATURE [ OK ]
LD2 TEMPERATURE [ OK ]
LD1 STATUS [ OK ]
LD2 STATUS [ OK ]
SHUTTER(MUTE-SHUT T ER) [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
OPTICS MODULE TEMP.SENSOR [ OK ]
EXHAUST AIR TEMP.SENSOR [ OK ]
LD1 TEMP.SENSOR [ OK ]
LD2 TEMP.SENSOR [ OK ]
POWER CIRCUIT T EMPERAT URE [ OK ]
FPGA TEMPERATURE [ OK ]
BATTERY [ OK ]
LENS MO UNTER [ OK ]
BRIGHTNESS SENSOR [ OK ]
PHOSPHOR WHEEL1 [ OK ]
PHOSPHOR WHEEL2 [ OK ]
FILTER UNIT [ OK ]
AIR FILTER [ OK ]
AC VOLTAGE [ OK ]
(Error code 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00)
Intake air temperature : 30 degC / 86 degF
Optics module temperature : 39 degC / 102 degF
Exhaust air temperature : 32 degC / 89 degF
Around light1 temperat ure : 34 degC / 93 degF
Around light2 temperat ure : 34 degC / 93 degF
PROJECT OR RUNTIME 77 H
POWER O N 1906 times
LD1-1 O N 1906 times
LD1-1 RUNT IME 76 H
LD1-2 O N 1906 times
LD1-2 RUNT IME 76 H
LD1-3 O N 1906 times
LD1-3 RUNT IME 76 H
LD1-4 O N 1906 times
LD1-4 O N 1906 times
LD1-4 RUNT IME 76 H
LD1-5 O N 1906 times
LD1-5 RUNT IME 76 H
LD1-6 O N 1906 times
LD1-6 RUNT IME 76 H
LD2-1 O N 1900 times
LD2-1 RUNT IME 75 H
LD2-2 O N 1900 times
LD2-2 RUNT IME 75 H
LD2-3 O N 1900 times
LD2-3 RUNT IME 75 H
LD2-4 O N 1900 times
LD2-4 RUNT IME 75 H
LD2-5 O N 1900 times
LD2-5 RUNT IME 75 H
LD2-6 O N 1900 times
LD2-6 RUNT IME 75 H
-------- Current status ---------
MAIN VERSION 0. 24
SUB VERSION 0. 04. 01
LD STAT US
LD1-1=ON LD1-2=ON LD1-3=O N LD1-4=OFF LD1-5=OF F LD1-6=ON
LD2-1=ON LD2-2=ON LD2-3=O N LD2-4=OFF LD2-5=OF F LD2-6=OF F
INPUT SDI1
SIGNAL NAME ---
SIGNAL F REQUENCY ---kHz / ---Hz
REMOTE2 STATUS DISABLE
----- Wired Network configuration -----
DHCP Client OFF
IP address 192.168.0.8
MAC address 12:34:56:78:90:12
Mon Jan 01 12: 34: 56 20XX
----- Memo -----