Operation Manual

Chapter 4 Settings — [PICTURE] menu
ENGLISH - 89
Terminal System format
<SDI IN 1> terminal, <SDI IN
2> terminal
For single link
Select [AUTO], [480i YC
B
C
R
], [576i YC
B
C
R
], [720/50p YP
B
P
R
],
[720/60p YP
B
P
R
], [1035/60i YP
B
P
R
], [1080/24p YP
B
P
R
],
[1080/24sF YP
B
P
R
], [1080/25p YP
B
P
R
], [1080/30p YP
B
P
R
],
[1080/50i YP
B
P
R
], [1080/60i YP
B
P
R
], [1080/50p YP
B
P
R
],
[1080/60p YP
B
P
R
], [1080/24p RGB], [1080/24sF RGB],
[1080/25p RGB], [1080/30p RGB], [1080/50i RGB], or
[1080/60i RGB].
For dual link
Select [AUTO], [1080/24p RGB], [2K/24p RGB], [2K/24p XYZ],
[1080/24sF RGB], [2K/24sF RGB], [2K/24sF XYZ], [1080/25p RGB],
[1080/30p RGB], [1080/50i RGB], [1080/60i RGB], [1080/50p
RGB], [1080/60p RGB], [1080/50p YP
B
P
R
], [1080/60p YP
B
P
R
],
[2K/48p RGB], [2K/48p YP
B
P
R
], [2K/50p RGB], [2K/50p YP
B
P
R
],
[2K/60p RGB], or [2K/60p YP
B
P
R
].
4) Press the <ENTER> button.
Note
f Refer to “List of compatible signals” (x page 206) for the types of video signals that can be used with the projector.
f This may not function properly for some connected external devices.
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction dened by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 107).
2) Display the [PICTURE] menu.
f Refer to “[PICTURE] menu” (x page 82).
3) Press as to select [PICTURE MODE].
4) Press qw to set [NATURAL].
5) Press as to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
7) Follow Steps 5) to 6) to set [TINT], [COLOR TEMPERATURE], [GAMMA], and [SYSTEM DAYLIGHT
VIEW] to the factory default settings.
Note
f sRGB is available for RGB signal input only.