Operation Manual

15
Installation
Installation
Connecting to a Computer
COMPUTER IN 1
DVI - I
MONITOR OUT
S-VIDEO
COMPUTER IN 2 /
COMPONENT IN /
COMPUTER /
COMPONENT
AUDIO IN
AUDIO IN
R VIDEOL
USB
SERVICE PORT
RESET
(MONO)
ARIALE)
AUD
COMPUTER IN 1
MONITOR OUT
S-VIDEO
COMPUTER
/ COMPONENT
AUDIO IN
AUDIO IN
R VIDEOL
USB
SERVICE PORT
RESET
(MONO)
/ COMPONENT IN
COMPUTER IN 2
/
AUDIO OUT
(VARIABLE)
Cables used for connection
• VGA Cables (HDB 15 pin) (Only a cable is supplied.)
• USB Cable ✽
• Audio Cables (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
External Audio Equipment
VGA cable
USB cable ✽
Audio cable (stereo) ✽
Audio cable ✽
(stereo)
Monitor Output
USB port
Audio Output
COMPUTER IN 1/ COMPONENT IN
(or COMPUTER IN 2/ MONITOR OUT)
USB COMPUTER/ COMPONENT
AUDIO IN
AUDIO OUT
(stereo)
Audio Input
This terminal is switcheable. Set up
the terminal as either Computer input
or Monitor output. (See Page 41.)
VGA cable ✽
Monitor Input
COMPUTER IN 2/ MONITOR OUT
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
✔Note:
• If you wish to use Page ed buttons on the remote control, connect USB port of
your computer to the USB socket of the projector. (p9 and 42)
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
• When the cable is
of the longer variety
, it is advisable to use the COMPUTER IN 1 /
COMPONENT IN and not the COMPUTER IN 2 / MONITOR OUT.
• Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the
COMPUTER IN 2/ MONITOR OUT terminal as input.