Multimedia Projector Owner's Manual

47
Setting
Note:
•Auto Keystone correctsvertical distortion only, not
correcthorizontaldistortion.
•The
Auto Keystonefunctioncannotworkwhenthe
CeilingfeatureissetOnintheSettingmenu(p.52).
•Perfect correction of the image distortion cannot
be ensured with the Auto setup function. If the
distortion is not corrected properly by pressing the
AUTO SETUP/CANCEL button, adjust manually
by pressing the KEYSTONE button on the remote
control or selecting
Keystone in the Setting menu
(pp.25,48).
•Fine sync., Total dots, Horizontal and Vertical
positionofsomecomputerscannotbefullyadjusted
with the Auto PCAdjustment function. When the
image is not provided properly with this operation,
manualadjustmentsarerequired(pp.33-34.
Auto setup
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point ▲▼
buttonstoselectoneofthefollowingoptions.
Off......Inputsearchwillnotwork.
On1.... Inputsearchworksunderthefollowingsituation.
–WhenpressingtheAUTOSETUP/CANCEL
buttononthetopcontrol.
–WhenpressingtheAUTOSET/CANCELbutton
ontheremotecontrol.
On2.... Inputsearchworksunderthefollowingsituation.
–Whenturningontheprojectorbypressingthe
ON/STAND-BYbuttononthetopcontrolorthe
remotecontrol.
–WhenpressingtheAUTOSET/CANCELbutton
ontheremotecontrol.
–When pressing the AUTO SETUP
/CANCEL
buttononthetopcontrol.
–Whenthecurrentinputsignaliscutoff.*
* If the No show or Freeze function is active, cancel it to
activate the Input search.It is also unavailable whenOn-
Screenmenuisdisplayed.
Auto PC Adj.
On . . . . . . EnablesAuto PCAdjustment when pressing
the AUTO SET/CANCEL button on the
remotecontrolortheAUTOSETUP/CANCEL
buttononthetopcontrol.
Off . . . . . .DisablesAutoPCAdjustment.
Auto Keystone
Auto. . . . Alwaysworksandcorrectskeystone
distortionaccordingtotheprojector'stilt.
Manual . .WorksonlywhenpressingtheAUTOSETUP/
CANCELbuttononthetopcontrol.
Off . . . . . .DisablesAutoKeystone.
Auto setup
Note:
•While
Input searchissettoOn1orOn2,thestatusof
InputandLamparedisplayedeverytimethesignalis
switched.
•Onlythelastselectedinputsourcecanbedetected.
•IftheINPUTbuttononthetopcontrolorCOMPUTER,
VIDEOorNETWORKbuttonsontheremotecontrolis
pressedduringInputsearchisinprogress,Inputsearch
willstopandgobacktothepreviousinputsignal.
•Auto PC Adj. and Auto Keystone cannot be set Off at the
sametime.
This function enables Input search,Auto Keystone correction
and Auto PC adjustment by pressing the AUTO SETUP/
CANCELbuttononthetopcontrol.Settingsforthosefunctions
canbealteredasfollows: