Multimedia Projector Owner's Manual

40
Video Input
ChooseComputer 1(Component) orComputer 1(Scart)bypressingtheINPUTbuttononthe top control or
presstheCOMPUTERbuttonontheremotecontrol.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
UsethePoint▲▼buttonstoselectComputer 1and
thenpressthePoint►button.
Input Source Selection (Component, RGB Scart 21-pin)
Whentheinputsourceiscomingfromvideo
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGACable,selectComponent.
Component
Whentheinputsourceiscomingfromvideo
equipment connected to the COMPUTER
IN1/COMPONENTINterminalwithaScart-
VGACable,selectRGB (Scart).
RGB (Scart)
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to selectInput and
thenpressthePoint►orSELECTbutton.
Note:

 •Network is for the Network function. See owner’s
manual“NetworkSet-upandOperation”.
 •WhentheInputSearchfunctionissettoOn1orOn2,
theinputsignalwillbesearchedautomatically(p.47).
COMPUTER button
Top Control
INPUT button
Remote Control
3
UsethePoint▲▼buttonstoselectComponentor
RGB(Scart) andthenpresstheSELECTbutton.
Computer 1
Video
S-video
Computer 2
Computer 1
Computer 2
Network