Multimedia Projector Owner's Manual

39
ChooseVideoorS-videobypressingtheINPUTbuttonon
thetopcontrolortheVIDEObuttonontheremotecontrol.
Beforeusing these buttons,correctinput sourceshouldbe
selectedthroughmenuoperationasdescribedbelow.
1
2
Video
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When video input signal is connected to the
VIDEOjack,selectVideo.
Video
When video input signal is connected to the S-
VIDEOjack,selectS-video.
S-video
Note:
 •Network is for the Network function. See the owner’s
manual“NetworkSet-upandOperation”.
 •WhentheInputSearchfunctionissettoOn1orOn2in
theAutosetupfunction,theinputsignalwillbesearched
automatically(p.47).
Top Control
INPUT button
Remote Control
VIDEO button
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectInputand
thenpresstheSELECTbutton.
UsethePoint▲▼buttonstoselecteitherVideoor
S-videoandthenpresstheSELECTbutton.
Computer 1
Video
Computer 2
S-video
Video
S-video
Network