Projector User Manual

53
Setting
Power management
No signal
04 : 50
TimeleftbeforeLampisoff.
Power management
For reducing power consumption as well as maintaining
thelamplife,thePowermanagementfunctionturnsoffthe
projection lamp when the projector is not operated for a
certainperiod.
Selectoneofthefollowingoptions:
Ready.................. When the lamp has been fully cooled
down, the POWER indicator changes
to green blinking. In this condition, the
projection lamp will be turned on if the
inputsignalisreconnectedoranybutton
on the top control or remote control is
pressed.
Shut down.......... When the lamp has been fully cooled
down,thepowerwillbeturnedoff.
Off....................... Powermanagementfunctionisoff.
Timer................... If the input signal is interrupted and
no button is pressed for more than 30
seconds, the timer display with No
signal appears. It starts the countdown
untilthelampisturnedoff.UsethePoint
▲▼buttonstosettheTimer(1~30min.).
Note:
Factorydefaultis
Ready: 5 min..