Projector User Manual

50
Capture
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval of
presentations.
SelectcaptureandpresstheSELECTbutton.
AconfirmationboxappearsandselectYestocapturethe
projectedimage.
After capturing the projected image, go to the Logo select
functionandsetittoUser.Thenthecapturedimagewillbe
displayed the next time you turn on the projector or when
youpresstheNOSHOWbutton(seepage28).
Tocancelthecapturefunction,selectYesinthe"Quit?"
confirmationbox.
Note:
 •Before capturing an image, select
Standard in the
Image select Menu to capture a proper image (pp.35,
42).
 •A signal from a computer can be captured up to XGA
(1024 x 768).A signal from video equipment can be
capturedexceptfor720p,1035iand1080i.
 •When capturing the image that has been adjusted by
theKeystonefunction,theadjusteddataisautomatically
reset and the projector captures an image without
keystonecorrection.
 •WhenLogo PIN code lockissettoOn,capturecannot
beselected.
 •When starting to capture a new image, the previously
storedimageisclearedevenifyoucancelthecapturing.
•When there is no captured image or it is interrupted
whilecapturinganimage,Usercannotbeselected,you
canonlyswitchbetweenDefaultandOff.
Logo PIN code lock
Thisfunctionpreventsanunauthorizedpersonfrom
changingthescreenlogo.
 Off...........Thescreenlogocanbechangedfreelyfrom
theLogoMenu(p.49).
 On...........Thescreenlogocannotbechangedwithouta
LogoPINcode.
If you want to change the Logo PIN code lock setting,
press the SELECT button and the Logo PIN code dialog
boxappears.EnteraLogoPINcodebyfollowingthesteps
below. The initial Logo PIN code is set to "4321" at the
factory.
Logo PIN code lock
Setting