Projector User Manual

47
Setting
Note:
 •Auto Keystone correctsvertical distortion only,not
correcthorizontaldistortion.
 •The
Auto Keystonefunctioncannotworkwhenthe
CeilingfeatureissetOnintheSettingmenu(p.52).
 •Perfect correction of the image distortion cannot
be ensured with the Auto setup function. If the
distortion is not corrected properly by pressing the
AUTO SETUP/CANCEL button, adjust manually
by pressing the KEYSTONE button on the remote
control or selecting
Keystone in the Setting menu
(pp.25,48).
 •Fine sync, Total dots, Horizontal and Vertical
positionofsomecomputerscannotbefullyadjusted
with the Auto PCAdjustment function. When the
image is not provided properly with this operation,
manualadjustmentsarerequired(pp.33-34.
Auto setup
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point ▲▼
buttonstoselectoneofthefollowingoptions.
Off......Inputsearchwillnotwork.
On1.... Inputsearchworksunderthefollowingsituation.
 –WhenpressingtheAUTOSETUP/CANCEL
buttononthetopcontrol.
 –WhenpressingtheAUTOSET/CANCELbutton
ontheremotecontrol.
On2.... Inputsearchworksunderthefollowingsituation.
 –Whenturningontheprojector by pressingthe
ON/STAND-BYbuttononthetopcontrolorthe
remotecontrol.
 –WhenpressingtheAUTOSET/CANCELbutton
ontheremotecontrol.
 –When pressing the AUTO SETUP
/CANCEL
buttononthetopcontrol.
 –Whenthecurrentinputsignaliscutoff.*
* If the No show or Freeze function is active, cancel it to
activate the Input search. Itis also unavailable when On-
Screenmenuisdisplayed.
Auto PC adj.
On . . . . . .   EnablesAuto PCAdjustment when pressing
the AUTO SET/CANCEL button on the
remotecontrolortheAUTOSETUP/CANCEL
buttononthetopcontrol.
Off . . . . . . DisablesAutoPCAdjustment.
Auto Keystone
Auto. . . . Alwaysworksandcorrectskeystone
distortionaccordingtotheprojector'stilt.
Manual . .WorksonlywhenpressingtheAUTOSETUP/
CANCELbuttononthetopcontrol.
Off . . . . . . DisablesAutoKeystone.
Auto setup
Note:
•While
Input searchissettoOn1orOn2,thestatusof
InputandLamparedisplayedeverytimethesignalis
switched.
•Onlythelastselectedinputsourcecanbedetected.
•IftheINPUTbuttononthetopcontrolorCOMPUTER,
VIDEOorNETWORKbuttonontheremotecontrolis
pressedduringInputsearchisinprogress,Inputsearch
willstopandgobacktothepreviousinputsignal.
 •Input search, Auto PC adj. and Auto Keystone cannot be
set
Offatthesametime.
This function enables Input search,Auto Keystone correction
and Auto PC adjustment by pressing the AUTO SETUP/
CANCELbuttononthetopcontrol.Settingsforthosefunctions
canbealteredasfollows: