Projector User Manual

25
Basic Operation
RotatetheZoomRingtozoominandout.
RotatetheFocusRingtoadjustthefocusoftheimage.
Zoom and Focus Adjustment
If a projected picture still has keystone distortion after
pressing theAUTO SETUP/CANCEL button on the top
control or theAUTO SET/CANCEL button on the remote
control,correcttheimagemanuallyasfollows:
Press the KEYSTONE button on the remote control. The
Keystonedialogboxappears.UsethePoint▲▼buttonsto
correctkeystonedistortion.Thekeystoneadjustmentcanbe
stored(seepage48).
Reducetheupperwidth
withthePoint▲button.
Reducethelowerwidth
withthePoint▼button.
•Thewhitearrowsindicatethatthereisno
correction.
•Aredarrowindicatesthedirectionofcorrection.
•Anarrowdisappearsatthemaximumcorrection.
•If you press the KEYSTONE button on the
remote control once more while the keystone
dialog box is being displayed, the keystone
adjustmentwillbecanceled.
•Theadjustablerangeislimiteddependingonthe
inputsignal.
Keystone Correction
Remote Control
Auto setup function is provided to automatically execute
the setting ofAuto setup (includes Input search,Auto PC
adj. andAuto Keystone functions) in the setting menu by
justpressing theAUTOSETUP/CANCELbuttononthetop
control or theAUTO SET/CANCEL button on the remote
control. Refer to page 47 for the setting of theAuto setup
function.
Note:
 •Auto Keystone corrects vertical distortion only; it does
notcorrecthorizontaldistortion.
 •Auto Keystone cannotworkwhenCeiling feature isset
toOnintheSettingmenu(p.52).
 •Perfect correction of the image distortion cannot be
ensured with theAuto setup function. If the distortion
cannot be corrected properly by pressing theAUTO
SETUP/CANCELorAUTOSET/CANCELbutton,adjust
manually by pressing the KEYSTONE button on the
remote control or selecting Keystone in the Setting
menu(p.48).
 •Fine sync,Total dots,Horizontal andVerticalposition
of some computers cannot be fully adjusted with
the Auto PC Adjustment function. When the image
is not provided properly with this operation, manual
adjustmentsarerequired(pp.33-34).
Auto Setup Function
ZoomRing
FocusRing
Top Control
AUTO SET/CANCEL button
POINT ▲▼buttons
KEYSTONE button
AUTOSETUP/CANCEL
button
POINT ▲▼buttons