Owner`s manual

52
Standby mode
Thisfunctionisavailablewhenoperatingtheprojectorvia
network.
 Normal......Supplythepowertothenetworkfunctioneven
afterturningofftheprojector.Youcanturnon/
off the projector via network, modify network
environment, and receive an e-mail about
projectorstatuswhiletheprojectorispowered
off.
 Eco............SelectEcowhenyoudonotusetheprojector
via network. The projector’s network function
willstopwhenturningofftheprojector.
Refertotheowner’smanual“NetworkSet-upand
Operation”.
Note:
•Factorydefaultis
Eco.
•Whenselecting
Normal,thecoolingfansmayberunning
dependingonthetemperatureinsidetheprojectorevenif
theprojectoristurnedoff.
Setting
On start
WhenthisfunctionissettoOn,theprojectorwillbe
automaticallyturnedonjustbyconnectingtheACpower
cordtoawalloutlet.
Note:
  Be sure to turn off the projector properly (see “Turning
OfftheProjector”onpage20).Iftheprojectoristurned
offintheincorrectsequence,theOnstartfunctiondoes
notworkproperly.