Operation Manual

Problem:
The lens Is pulled In when the
POWER Is switched off.
Picture Is L/R Reversed.
Try these Solutions:
Check AUTO RETRACT function.
(See “OTHER FUNCTICN SETTING” section on pages 44 - 45).
Check Ceiling/Rear feature.
(See “OTHER FUNCTION SETTING” section on pages 44 - 45).
Picture Is T/B inverted.
Check Ceiling feature.
(See “OTHER FUNCTION SETTING” section on pages 44 - 45).
Some displays are not seen
during the operation.
Na sound.
Check Display feature.
(See “OTHER FUNCTION SETTING” section on pages 44 - 45).
l Check audio cable connection from audio input source.
l Adjust audio source.
l Press the VOLUME (+) button.
l Press the MUTE button.
Remote control unit doesn’t
work.
l Check the batteries.
aMake sure nothing is blocking between the remote control
sensor and remote control unit.
l Make sure you are,not too far from the projector when using the
remote control unit. Maximum operate range (5 m).
Wireless mouse function does
not work.
l Check the cable connection between the projector and the
computer.
l Check the mouse setting on your computer.
l Turn on the projector before you turn on the computer.
- 50 -