Multimedia Projector MODEL PDG-DWL100 Owner's Manual
Table of Contents Table of Contents Usage Notice Precautions............................................................. 2 Introduction Product Features.................................................... 5 Package Overview.................................................. 6 Product Overview................................................... 7 Projector.............................................................. 7 Connection Ports................................................. 8 Control Panel.........
Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. 2 English ■ Warning- This apparatus must be earthed. ■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. ■ Warning- To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.
Usage Notice ■ Warning- Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimensions shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained. SIDE and TOP REAR 1.5' (50 cm) 1.5' (50 cm) ■ Warning- 1.5' (50 cm) 3' (1 m) Avoid positioning the projector as described below when installing.
Usage Notice Do: ■ T urn off the product before cleaning. ■ Use a soft cloth moistened with mild detergent to clean the display housing. ■ Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: ■ Block the slots and openings on the unit provided for ventilation. ■ U se abrasive cleaners, waxes or solvents to clean the unit. ■ Use under the following conditions: - Extremely heat, cold or humidity.
Introduction Product Features This product is a WXGA single chip 0.65” DLP® projector. Outstanding features include: ■ True WXGA, 1280 x 800 addressable pixels ■ Single chip DLP® technology ■ NTSC3.58/NTSC4.
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. N ot e Due to the difference in applications for each country, some regions may have different accessories. Projector with lens cap Wireless Remote Control Power Cable VGA Cable Cable AC Power Cable (for U.S.A.) 42.00105G011 AC Power Cable (for Continental Europe) 42.00120G011 AC Power Cable (for UK) 42.
Introduction Product Overview Projector 1 7 4 7 2 3 5 7 4 6 Air Flow 4 7 8 1. 2. 3. 4. 5. 6. 7. 8.
Introduction Connection Ports 1 2 3 SERVICE PORT S-VIDEO IN 4 5 VIDEO IN MONITOR OUT 6 7 8 COMPUTER IN 1 COMPONENT IN 1 9 AUDIO IN (VARIABLE) AUDIO OUT COMPUTER IN 2 COMPONENT IN 2 10 11 12 1. SERVICE Port 2. HDMI Port 3. S-VIDEO IN Connector 4. VIDEO IN Connector 5. MONITOR OUT Connector 6. COMPUTER IN 2/ COMPONENT 2 Connector 13 7. COMPUTER IN 1/ COMPONENT 1 Connector 8. Network Port 9. AUDIO IN Jack 10. AC IN 11. AUDIO OUT Jack 12. KensingtonTM Lock Port 13.
Introduction Remote Control 1 2 3 4 15 5 6 16 17 7 8 9 18 10 11 20 21 12 22 13 14 23 19 24 1 Infrared transmitter Sends signals to the projector. 2 Infrared indica- Signals indicator for sending. tor 3 ON/STANDBY Refer to the “Power On/Off the Projector” section. (See pages 15~16) 4 ENTER Confirm your section of items in sub menu operation.
Introduction 5 MENU Press “MENU” to launch the Onscreen display (OSD), back to the top level of OSD for the OSD main menu operation 6 IMAGE Select the Image mode from Presentation, Movie, sRGB, Bright and User. 7 INPUT Press “INPUT” to choose RGB, SCART, Component, S-Video, Composite and HDMI sources. 8 D.ZOOM - Zoom out the projector display. 9 KEYSTONE +/- Adjust the image to compensate for distortion caused by tilting the projector. 10 LAMP CONTROL Select the lamp mode.
Introduction 19 VOLUME +/- Increase/decrease speaker volume. 20 Keypad 1~9 For input a password in the “Security settings”. 21 AUTO. ADJ Automatically synchronize the projector to the input source. 22 HDMI Press “HDMI” to choose HDMI connector. 23 S-VIDEO Press “S-VIDEO” to choose S-Video connector. 24 VIDEO Press “VIDEO” to choose Video connector.
Introduction Remote Control Battery Installation Open the battery compartment lid. 1 2 Install new batteries into the compartment. 3 Replace the compartment lid. Two AAA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. To ensure safe operation, please observe the following precautions : ■ Use two (2) AAA type batteries. ■ Always replace batteries in sets. ■ Do not use a new battery with a used battery.
Installation Connecting the Projector Connect to Computer/Notebook VGA, DVI N ot e Make sure that the power plug is fully inserted into both the projector AC inlet and the wall outlet. Audio Output 2 3 4 5 6 The AC outlet must be near this equipment and must be easily accessible.
Installation N ot e Connect to Video Make sure that the power plug is fully inserted into both the projector AC inlet and the wall outlet. 2 The AC outlet must be near this equipment and must be easily accessible. Other than the analog RGB signal, COMPUTER IN 1/2-COMPONENT IN 1/2 Connectors can be used to project the incoming Component and RGB Scart signals. (See Page 49 for the Optional Parts.
Installation Powering On/Off the Projector Powering On the Projector 1. Ensure that the power cable and signal cable are securely connected. The POWER LED will turn orange. 2. Remove the lens cap. N ot e 3. Turn on the lamp by pressing “ON/STAND-BY” on the Please adjust external control panel. The POWER LED will now flash green. speaker volume to the The startup screen will display in approximately 5 seconds.
Installation Powering Off the Projector 1. Press the “ON/STAND-BY” to turn off the projector lamp, you will see a message as below on the on-screen display. 2. Press the “ON/STAND-BY” again to confirm. 3. The cooling fan continues to operate for about 60 seconds for cooling cycle and the POWER LED will flash green. When the light starts flashing orange, the projector has entered standby mode.
Installation Warning Indicator When the “TEMP” LED indicator turns red, it indicates the projector has overheated. The projector will automatically shut itself down. When you see the message below displays on-screen, the projector has detected that the lamp is approaching its end of life. Please change the lamp as soon as possible or contact your local dealer or our service center. When the “TEMP” LED indicator flashes red and the message below displays on-screen, it indicates the fan failed.
Installation Adjusting the Projected Image Adjusting the Height of Projector Image The projector is equipped with adjustable feet to raise and lower the image to fill the screen. To raise/lower the image: 1. Use to fine-tune the display angle. N ot e You can raise the projector front up to 3 degrees by rotating the adjustable feet.
Installation Adjusting the Projector Focus To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 1.65 to 12.13 feet (0.5 to 3.7 meters) with mechanical travel. Focus Ring Adjusting Projection Image Size H : A = 6.78 B ÷ H x 100% = 115%(Offset) H Diagonal B A Lens Center 46" (116.8cm) 100" (254.0cm) 150" (381.0cm) 200" (508.0cm) 250" (635.0cm) 338" (858.5cm) A B Lens Center 1.651'(0.503m) 3.590'(1.094m) 5.385'(1.641m) 7.180'(2.188m) 8.
User Controls On Screen Display The Projector has a multilingual On Screen Display that allows you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD, press “MENU” on the Remote Control. 2. When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press key to enter sub menu. 3.
User Controls Image (PC Mode) Image Mode There are many factory presets optimized for various types of images. Use the N ot e When no signal is detected, the “Image” menu cannot be selected. The image Mode will change into “User” by adjusting the items. or to select the item. Presentation: For computer or notebook. Movie: For home theater. sRGB: For standard color. Bright: For bright room. User: Memorize user’s settings. Brightness Adjust the brightness of the image.
User Controls Fine Sync Eliminate flicker from the image displayed. Use the the value. or to adjust White Peaking Use the white peaking control to set the white peaking level of DMD chip. 0 stands for minimal peaking, and 10 stands for maximum peaking. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Color Temp. Adjust the color temperature.
User Controls Image (Video Mode) Image Mode There are many factory presets optimized for various types of images. Use the N ot e When no signal is detected, the “Image” menu cannot be selected. The image Mode will change into “User” by adjusting the items. or to select the item. Presentation: For computer or notebook. Movie: For home theater. sRGB: For standard color. Bright: For bright room. User: Memorize user’s settings. Brightness Adjust the brightness of the image.
User Controls Tint Adjust the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. White Peaking Use the white peaking control to set the white peaking level of DMD chip. 0 stands for minimal peaking, and 10 stands for maximum peaking.
User Controls Screen Keystone N ot e Adjust image distortion caused by tilting projector. H-position (Horizontal Position) The bottom side of OSD Press the to move the image left. menu might be out of display when user Press the to move the image right. adjusts keystone value, V-position (Vertical Position) under the status of low resolution signal input Press the to move the image down. and different aspect ratio setting. To solve Press the to move the image up.
User Controls Mounting Front-Desktop The factory default setting. Rear-Desktop Front-Ceiling Rear-Ceiling When you select this function, the projector reverses the image so you can project behind a translucent screen. When you select this function, the projector turns the image upside down for ceiling-mounted projection. When you select this function, the projector reverses and turns the image upside down at same time.
User Controls Setting Input Search When this function is turned “On”, the projector will search for other signals if the current input signal is lost. When this function is turned “Off”, it will only search a specified connection port. Fan Control hoose “On” to turn on Fan Control mode. Operate the fan at full C speed continuously to allow for proper high altitude cooling of the projector. Lamp Life Reminder Choose this function to show or to hide the lamp end of life warning message.
User Controls N ot e Please turn this function “Off ”, if you want to turn on “Power” by network during standby mode. Eco Standby Power (<1W) This function is available when the projector is turned off and in Stand-by. It is recommended to use Eco under normal condition. On: lower power consumption than Normal mode in Stand-by condition. Off: normal power consumption in Stand-by condition.
User Controls Volume: ■ Press the to decrease the volume. ■ P ress the to increase the volume. Lamp Counter Reset Reset the lamp life hour after replacing a new lamp. Security Settings Security Settings: ■ O n: Choose “On” to enable security verification when turning on the projector. ■ Off: Choose “Off” to be able to switch on the projector without password verification. Change Password: ■ F irst Time: 1. Press “ENTER” to set the password. 2.
User Controls Setting/Network Network Status Display the network connection status. DHCP Display the network connection status. On: Assign an IP address to the projector from the DHCP server automatically. Off: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. Gateway Select the default gateway of the network connected to the projector. DNS Select DNS number. Apply Press “ENTER” button to apply the selection.
User Controls Language Language N ot e In the first instance of powering on the projector, the language menu is displayed to select the default language. All subsequent operations assume the selected default language. hoose the multilingual OSD. Press C into the sub menu and then use the or or or key to select your preferred language. Press “ENTER” to finalize the selection. Information Information To display the projector information on the screen.
User Controls Controlling the Projector From Web N ot e Configuring the Network Setting If the Netscape user 1. Fill in a new IP, a subnet mask, a gateway and a DNS in the wants to control the dialogue box. projector from the web, the user needs to use Netscape 9.X or upgrade version. N ot e (1) U ser name:user / Password:user 2. Then choose apply and press “ENTER” button to effectuate the configuration process. 3. Open your web browser and type in the IP address, it has entered LOGIN mode.
User Controls For example: Use Microsoft Internet Explorer (IE) web browser to control the projector, the IP address is http: // 192.168.0.100. Step 1: Find an IP Address (192.168.0.250) from LAN function of projector. Step 2: Select apply and press “ENTER” button to submit function or press “MENU” key to exit. Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
User Controls Step 9: The web page will display as below: Step 10: Open “Control Panel” to control your projector.
User Controls Home Page N ot e When Home page display error status, it indicates the lamp failed. Stop using the projector and disconnect the power cable from the electrical outlet, then contact your local dealer or our service center. Access the Projector Web Server by entering the projector’s IP address at the web browser. The Home Page displays basic information about the projector.
User Controls Control Panel Page This page allows you to manage the projector status using a Web browser. How to operate Control Panel page Button setting: Action. N ot e The value in the text box indicates current value. Text box setting: Enter a number or text and then click “Set” button. Or Change a value with “-” or “+” button. N ot e Each item has a valid setting range. The setting value exceeding this becomes invalid.
User Controls Network Setting Page This page allow you to enable or disable DHCP and set network related addresses and names. Projector Setting Allows you to define the group name and projector name of the projector. (Maximum characters: 12). Network Setting Choose DHCP to assign an IP address to the projector from a DHCP server automatically, or Manual to assign an IP address manually. Network function setting, Refer to the “Network” section on page 30 for more information.
User Controls Security Setting Page This page allow you control the projector by using the telnet or PJLink application installed on your computer. New Password: Enter new password. Confirm Password: Enter password again and submit. Telnet Password Setting Only a four-digit number is valid for the telnet password. The default Telnet Password as [0000], which means no password is set. When you connect the projector to the network, it is recommended to set a new password.
User Controls Alert Setting Page Email Setting E-mail Alert: You can set whether to be notified by email (Enable) or not (Disable). To/CC/From: You can enter email address of sender (From) and recipients (To/Cc) to receive notification when an abnormality or warning occurs. Subject: You can enter the subject line of the email. Click the “Email Alert Test” button to test the e-mail alert settings.
User Controls Logout Page When you use this page, the projector system will go back Login mode.
Appendices Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local dealer or service center. Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed.
Appendices 4. Verify the resolution setting is less than or equal to 1600 x 1200 resolution. 5. Select the “Change” under the “Monitor” tab . 6. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings.
Appendices Check and reconfigure the display mode of your graphic card to make it compatible with the product. Problem: Image is out of focus Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance 1.65 to 12.13 feet (0.5 to 3.7 meters) from the projector (refer to page 19).
Appendices Problem: LED lighting message POWER-LED Message (Red) (Green) (Orange) TEMPLED LAMPLED (Red) (Red) Standby (Input power cable) Normal (Power on) Powering up (Warming up) Flashing Power off (Cooling-I: It can’t accept any key at this status) Flashing Power off (Cooling-II: It can accept power key to turn on the projector) Flashing * Error (Lamp failed) Error (Fan lock) Error (Over temp.) N ot e Steady light => No light => *=> When LED light on after 5 sec., go to standby mode.
Appendices Problem: Message Reminders Over temperature - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replacing the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Fan failed - the system fan is not working.
Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message Warning: To avoid burns, allow the projector to cool for at least 45 minutes before you replace the lamp! When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 45 minutes before changing the lamp.
Appendices ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ■ ■ Model No. of your projector Replacement Lamp Type No. : PDG-DWL100 : POA-LMP138 (Service Parts No. CHSP8EM01GC01 or 610 346 4633) LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.
Appendices Cleaning the Air Filters Air filters prevent dust from accumulating on the optical elements inside the projector. Should the air filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean the air filters following Do not operate the pro- the steps below. jector with the air filters removed. Dust may accumulate on the optical elements degrading picture quality.
Appendices Specifications Projection System Single Chip DLP® Technology by Texas Instruments Number of Pixels WXGA: 1280 pixels(H) X 800 lines(V), up to UXGA (1600 X 1200) with scaling technology Lamp 225W (170W on ECO mode) Projection Lens F#2.6 f=7.198mm with manual focus Projection Screen Size (Diag.) 46 to 338 inches (1.16 to 8.59 meters) Diagonal Projection Distance 1.65 to 12.13 feet (0.5 to 3.7 meters) Video Compatibility -N TSC-M/NTSC-4.
Appendices Computer Compatibility (Analog) (1) Signals from D-sub 15 Modes Resolution V.Frequency (Hz) H.Frequency (kHz) VGA 640 x 480 60 31.50 640 x 480 72 37.90 640 x 480 75 37.50 720 x 400 70 31.50 800 x 600 56 35.20 800 x 600 60 37.90 800 x 600 72 48.10 800 x 600 75 46.90 832 x 624 75 49.725 1024 x 768 60 48.40 1024 x 768 70 56.50 1024 x 768 75 60.00 *1280 x 1024 60 63.98 *1280 x 1024 75 79.98 1280 x 720 60 45.00 SVGA XGA SXGA WXGA 1280 x 800 60 49.
Appendices Computer Compatibility (DigitalHDMI) (1) PC digital signals with HDMI-DVI cable Modes Resolution V.Frequency (Hz) H.Frequency (kHz) VGA 640 x 480 60 31.50 640 x 480 72 37.90 640 x 480 75 37.50 720 x 400 70 31.50 800 x 600 56 35.20 800 x 600 60 37.90 800 x 600 72 48.10 800 x 600 75 46.90 832 x 624 75 49.725 1024 x 768 60 48.40 1024 x 768 70 56.50 1024 x 768 75 60.00 *1280 x 1024 60 63.98 *1280 x 1024 75 79.98 1280 x 720 60 45.00 1280 x 800 60 49.
Appendices (2) AV digital signals with HDMI cable 52 English Modes Resolution V.
Appendices Configurations of Terminals Terminal : Analog RGB (Mini D-sub 15 pin) 5 4 10 15 3 9 14 2 8 13 1 7 12 6 11 1 Red (R/Cr) Input/R Output 9 5V / *** 2 Green (G/Y) Input/G Output 10 Ground (Ver. sync.) 3 Blue (B/Cb) Input/B Output 11 ICP download 4 *** 12 DDC data / *** 5 Ground (Horiz.sync.) 6 Ground (Red) 13 Horiz. sync. Input / Output (Composite H/V sync. Input) 7 Ground (Green) 14 Vert. sync.
Appendices Regulation & Safety Notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.
Appendices Serial Control Interface This projector provides a function to control and monitor the projector’s operations by using the RS-232C serial port. Operation 1. Connect a RS-232C serial cross cable to SERVICE PORT on the projector and serial port on the PC. 2. Launch a communication software provided with PC and setup the communication condition as follows: 3. Type the command for controlling the projector and then enter the “Enter” key.
Appendices Functional Execution Command Format The command is sent from PC to the projector with the format below; ‘C’ [Command] ‘CR’ Command: two characters (refer to the command table below. ■ The projector decodes the command and returns the ‘ACK’ with the format below; ‘ACK’ ‘CR’ ■ When the projector cannot decode the command, it returns with format below. ‘?’ ‘CR’ projector and serial port on the PC.
Appendices Status Read Command Format The command is sent from PC to the projector with the format below; ‘CR’ [Command] ‘CR’ Command: one character (refer to the command table below. N ot e The tables on pages 56~58 show the typical command lists for controlling the projector. Please consult your local dealer for further information of other commands. N ot e During the standby mode status, the projector responds to “Power On” through RS232/ PJLink/Telnet commands.
Appendices N ot e The telnet 10000 port is used to control the projector. Use of Telnet You can control the projector by using the telnet application installed on your computer. Normally, the telnet application is available on your computer. Further instructions about the telnet application, please see the on-line guide on your (For example, in case of using the telnet application of Windows XP computer. Professional.) Control 1. Select Run... submenu from Start menu on the computer.
Appendices N ot e Enter with ASCII 64-byte capital characters and one-byte characters. N ot e 4. Type the commands, refer to right table, to control the projector and then press “Enter” key for termination. For example, type “C00” which is a command to turn on the projector, and press “Enter” key. Confirm the projector is turning on. Command list table Command To disconnect the communication, press “Ctrl” key and “]” key at the same time, type “close” and then press “Enter” key on the Keyboard.
Appendices Dimensions 1.52"/38.70mm 4.75"/120.54mm 12.06"/306.53mm Lens Center 2.55"/64.67mm 5.07"/128.92mm 4.74"/120.54mm 3° Max. 11.51"/292.29mm 9.93"/252.30mm 0.47"/11.89mm 4.13"/105.00mm 4.99"/126.70mm 2.59"/65.70mm 4.70"/119.50mm 0.74"/18.80mm 4.06"/103.10mm 4.06"/103.10mm Screw Holes for Ceiling Mount Screw: M4 Depth: 0.47”/12.
KY5A
