User Guide

16 2A. Device Basics
Turning Your Device On and Off
Turning Your Device On
䊳 Press and hold .
Once your device is on and finds a signal, it
automatically enters standby mode – the device’s idle
state. At this point, you are ready to begin making and
receiving calls.
If your device is unable to find a signal after five
minutes of searching, a Power Save feature is activated
and your device searches for a signal periodically
without your intervention. When a signal is found, your
device automatically returns to standby mode.
Turning Your Device Off
1. Press and hold for two seconds. The
Phone options window appears.
2. Touch Power off > OK to turn the device off.
Battery and Charger
Sprint-approved or Kyocera-approved batteries and
accessories can be found at Sprint Stores or through
Kyocera; or call 1-866-866-7509 to order. They are also
available at
www.sprint.com.
Battery Capacity
Your device is equipped with a Lithium Ion (Li-Ion)
battery. It allows you to recharge your battery before it is
fully drained. The battery provides up to 4.6 hours of
continuous digital talk time.
When the battery level drops to 10%, the LED indicator
begins flashing red. When the battery level drops
below 5%, the battery icon changes to and a pop-
up window warns you that the battery is low. When the
Tip: The Power Save feature conserves your battery power
when you are in an area where there is no signal.
WARNING: Use only Sprint-approved or Kyocera-approved
batteries and chargers with your device. The
failure to use a Sprint-approved or Kyocera-
approved battery and charger may increase the
risk that your device will overheat, catch fire, or
explode, resulting in serious bodily injury, death,
or property damage.