CAUTION RISK OF ELECTRIC SHOCK DO NOT OPENN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. T H I S S Y M B O L I N D I C AT E S T H AT D A N G E R O U S VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS RESENT WITH THIS UNIT. T H I S S Y M B O L I N D I C AT E S T H AT T H E R E A R E I M P O RTA N T O P E R AT I N G A N D M A I N T E N A N C E INSTRUCTIONS IN THE OWNER’S MANUAL WITH THIS UNIT.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses an can radiate radio frequency energy and, if no installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS............2 FCC INFORMATION............................................3 ENERGY STAR® USER INFORMATION............3 TRADEMARKS.....................................................3 PROTECTING THE LCD SCREEN..............3 HANDLING PRECAUTIONS........................3 ASSEMBLY-ATTACHING THE TV STAND.........4 INSTALLATION.....................................................5 POSITIONING THE LCD HDTV...................5 WALL MOUNTING (OPTIONAL)..................
INSTALLATION POSITIONING THE LCD HDTV 42” 40.3 3.6 Always use a firm-flat surface when positioning your HDTV. Do no position the unit in a confined area. Allow adequate space for proper ventilation. 27.5 25.6 19” 18.2 2.5 1.8 19.9 9.9 NOTE: All dimensions are in inches. 13.8 WALL MOUNTING (OPTIONAL) 12.5 1.4 8.6 6.6 Use the screws that are threaded into the standmounting inserts on the back of your HDTV to secure it to a wall mounting kit. NOTE: 1. Wall Mounting kit is not supplied. 2.
GETTING STARTED 1無 Install supplied batteries in the Remote. RECAUTIONS Do not use rechargeables together with dry cells, other types, mixed new and old, or batteries with different charge levels. Do not expose the Remote or batteries to moisture or heat or such as sunshine, fire, or the like. Match the “+” and “-” signs on the batteries with marks inside the Remote Control. Please recycle used up rechargeable batteries. 2無 Antenna Connection for off-air signals.
GETTING STARTED-CONTROLS AND JACKS BACK-SIDE PANEL LEFT-SIDE PANEL Power key Channel keys Volume _ +keys Menu key Input key VIDEO L R Video 2 input keys VIDEO 2 INPUT Component Video Input VIDEO3 (YPbPr), PAGE 9 - Connect digital video equipment to the Video Green (Y), Blue (Pb), Red (Pr) jacks, and matching Audio White (L) and Red (R) jacks. These jacks will automatically detect the type of signal being received.
REMOTE CONTROL OPERATION MUTE Key - Press to mute or restore the sound. Number Keys - Press number keys to select a channel. Example: Press 6 then OK key to select analog channel A6. Press 6 then 1-- key to select digital channel D6. INPUT Key - Press to select the source to view: TV, VIDEO1, VIDEO2, YPbPr, HDMI1, HDMI2, HDMI3, or PC Input. SPORTS Key - Press to choose between options Football, Winter Sports, Marine Sports, Indoor Sports, and Off in turn.
GETTING STARTED-CONNECTIONS 3無 Analog Signal Connections - VIDEO1 or VIDEO2 (optional) Connect an analog device, such as, an Analog Cable Box, Satellite Receiver, or VCR Composite connectors are included on your new HDTV to provide continued compatibility with older analog devices, such as a VCR. The S-Video connector will provide the best analog resolution. If you have an S-Video connector on your old analog equipment, you should use it instead of the standard video connector.
GETTING STARTED-POWER CONNECTION/CHANNEL SEARCH POWER CONNECTION 5無 Plug in AC power cord (120V AC, 60Hz) 6無 Press the POWER key, (Follow the on-screen instructions). To 120V AC outlet. INITIAL CHANNEL SCAN 7無 Use the CURSOR ▲(UP) and ▼(Down) keys to highlight the Channel Scan. Press OK. Choose the Scan to start the channel scanning. The scanned channels are stored in channel List and can be scanned using the CURSOR ▲(UP) and ▼(Down) keys.
ADVANCED AV CONNECTIONS ADVANCED DIGITAL SIGNAL CONNECTIONS-HDMI TO HDMI Connect compatible Digital devices, such as, an HD Cable Box, HD Satellite Receiver, DVD Player, and Game System. DIGITAL AUDIO 1無 Connect the Digital Audio output to a multichannel receiver, as shown. NOTE: Dolby Digital audio is available at the Digital Audio Output only when received as part of a Digital Antenna being viewed on the screen. HDMI-High-Definition Multimedia Interface.
PC CONNECTIONS NOTE: Before connecting any cables, disconnect the AC Power Cords of both the HDTV and Personal Computer from the AC outlets. 1無 2無 Connect an RGB cable from the monitor output on your PC to the RGB connector on the HDTV and tighten the screws. (Monitor Cable not supplied). Insert one end of a Stereo Mini-Audio cable into the PC Audio Out jack and the other end into the HDTV PC Audio Input jack. (Stereo Mini-Audio Cable not supplied).
Sports Mode Choosing mode just by pushing “SPORTS” key on remote controls, TV automatically optimizes both picture & sound setting for programs. ■■ Off ■■ Football −− For golf, football programs etc. −− Fresh green of lawn −− Enfolding cheering voices, ball hitting sounds ■■ Winter Sports −− For skiing, ice skating programs ect. −− Details kept white, vivid color of costume −− Enhanced skiing/skating sounds ■■ Marine Sports −− For swimming, diving programs ect.
ON-SCREEN MENU OPERATION MENU NAVIGATION MAP CHANNEL ADJUSTMENT SIGNAL SOURCE OPERATION Signal SourceThere are two categorizing: ● Air ● Cable AIR(Antenna) Search: It will search for analog and digital channels that are broadcast over-the-air. Cable Search: It looks for analog cable channels and unscrambled (Clear QAM) digital cable channels. 14 1無 Press the MENU key on the remote control to display the Main menu. Use CURSOR ◄ ► key to highlight the CHANNEL mode. Press OK.
ON-SCREEN MENU OPERATION (CONTINUE) CHANNEL LIST OPERATION DELETING CHANNELS FROM CHANNEL LIST Channel List is a database of active channels you can scan through using the CURSOR ▲(UP) and ▼(Down) keys. Customize it by deleting or adding channels. 2無 1無 2無 3無 Press the MENU key on the remote control to display the Main menu. Use the CURSOR ◄ ► keys to highlight CHANNEL mode. Press OK. Use the CURSOR ▲(UP) and ▼(Down) keys to highlight Channel Scan. Press OK. Make the channel scan process complete.
ON-SCREEN MENU OPERATION (CONTINUE) PARENT ADJUSTMENT LOCK OPERATION Depend on V-Chip- It follows the restricted channels broad casting setting within MPAA and TV Rating option in PARENT menu. Lock- Block the broadcast of the current displayed channel directly or current source input. 1無 2無 3無 This Sanyo television is equipped with an electronic V-Chip to interpred MPAA (Motion Picture Association of America) and TV Parental Guidelines rating codes.
ON-SCREEN MENU OPERATION(CONTINUE) CAN ENGLISH OPERATION REGION NAME OPERATION 1無 Region Name- Region Name for V-Chip Regional Rating 5 (RRT5) is an advanced V-Chip ratings system for digital channels that are received with an antenna. When the HDTV detects compatible RRT5 data, it is downloaded and stored in memory and the menu is modified to include and advanced adjustment option. 2無 3無 4無 Press MENU key and then use the CURSOR ◄ ► keys to highlight PARENT mode. Press OK. Enter password.
PICTURE/ AUDIO/ ADVANCED ADJUSTMENT PICTURE RESET PICTURE OPERATION Reset Picture- It can make the previous adjusting settings during the PICTURE mode recovered from the factory default value. 1無 2無 3無 Use CURSOR ◄ ► keys to highlight the PICTURE mode. Press OK. Use CURSOR ▲(UP) and ▼(Down) keys to highlight the Reset Picture option. Press OK. Use CURSOR ▲(UP) and ▼(Down) keys to select Reset or Cancel option. Press OK. NOTE : Press MENU key to return back to PICTRUE mode menu.
HDMI AUDIO OPERATION HDMI Audio- It includes three categories: AUTO- It means the system will automatically detects the available Digital and Analog input sources and take the most suitable Audio output by the category of the assigned input currently. The Analog input (CVBS) is the default accepted setting unless the Digital input (HDMI) has been detected. The Analog output (CVBS) and Digital input (HDMI) don't exist simultaneously. Digital- During this setting, the Analog audio output won't be occured.
PIX SHAPE OPERATION OSD DISPLAY TIME OPERATION Pix Shape- There are three categories during it. And the showned troop of options during Pix Shape mode change by detecting HD, SD, or PC inputs.
SYSTEM SLEEP OPERATION Sleep- There are seven categories of Off, 30 min, 60 min, 90 min,120 min, 150 min, and 180 min for your choice of setting the counting down of time you desire the HDTV to be turned off by itself. The default setting is Off. 1無 Press the MENU key on the remote control to display the Main menu. 2無 Use CURSOR◄ ► keys to highlight the SYSTEM mode. Press OK. 3無 Use CURSOR ▲(UP) and ▼(Down) keys to highlight the Sleep option. Press OK.
CC STYLE SETTING OPERATION RESET SYSTEM OPERATION CC Style Setting- Caption is textual information transmitted along with the picture and sound. Reset System- It can make the previous adjusting settings during the SYSTEM mode recovered from the factory default value Turning captioning ON causes the HDTV to open these captions (Digital or Analog) and superimpose them on the screen. (Local broadcasters decide which caption signals to transmit).
HELPFUL HINTS - Problems / Solutions If you are having problems with your HDTV, check this trouble shooting chart to find one or more possible solution. Problem: No picture, sound (Digital Picture) Before returning your HDTV, please visit our website at www.sanyoctv.com or call us toll free at 1.800.877.5032. We can Help! Check these Conditions: Try these Solutions: • Check antenna / external connections • Adjust antenna. • Try a different channel. • Maybe station trouble, NO signal broadcast.
SPECIFICATIONS Maximum Visible Range LCD-19E3 LCD-26E3 LCD-32E3 LCD-42E3 (H)409.8 × (V)230.4 mm (18.51 inches) (H)575.769 × (V)323.712 mm (26 inches) (H)697.685 × (V)392.256 mm (31.51 inches) (H)930.24 × (V)523.26 mm (42.
Dimensions (Including Stand) 19” 26” 32” 42” (W)463 x (H)351 x (D)168 mm (W)668 x (H)495 x (D)210 mm (W)802 x (H)571 x (D)210 mm (W)1023 x (H)697 x (D)250 mm Net Weight (Including Stand) 19” 26” 32” 42” 4.4 kg 8.0 kg 11.1 kg 19.1 kg Operating Environment Operating Temperature: Operating: 5°C to 35°C Operating Humidity: 0 % to 90 % Storage Temperature: 0°C to 40°C Storage Humidity: 0% to 90% (non-condensing) ■■ Specifications ■■ The are subject to change without notice.
SIGNAL MODE COLUMN (recommended) This LCD TV can correspond to the signals below. After connecting with the computer, LCD TV can automatically recognize the signal from the connected PC (computer) / HDMI. PC SIGNAL MODE COLUMN (recommended)® 19” / 26” / 32” / 42” SYSTEM MODE Resolution V-Freq.(Hz) H-Freq.(KHz) PIXELS CLOCK (MHz) VGA SVGA XGA WXGA WXGA 640x480 800x600 1024x768 1360x768 1280x768 59.94 60 60 60 60 31.47 37.88 48.36 47.712 47.78 25.18 40 65 85.5 79.5 1280x1024 60 63.
