LCD TV MODEL LCD-32CA9S LCD-37CA9S LCD-42CA9S Owner’s Manual LCD-CA9S-A NEW.
TO THE OWNER Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly. This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Do not install the LCD TV near the ventilation duct of air-conditioning equipment. Read all of the instructions given here and retain them for later use. Unplug this LCD TV from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. This LCD TV should be operated only from the type of power source indicated on the marking label.
TABLE FEATURE AND DESIGN .....................................5 TEXT YELLOW 23 PREPARATION........................................6 TEXT BLUE 23 PART NAMES AND FUNCTIONS 6 C O N N E C T I N G L C D T V. . . . . . . . . . . . . . . . . . . . . . . 8 MENU OPERATION (TV/AV MODE)..............24 CHANNEL 24 CONNECTING THE AC POWER CORD 8 PICTURE 26 CONNECTING OUTDOOR AERIAL 8 SOUND 27 CONNECTING A COMPUTER 9 TIMER 28 OSD 29 SYSTEM 30 CONNECTING VIDEO EQUIPMENT 10 BEFORE OPERATION....
Feature and Design X Picture O High Definition LCD Panel 1366 x 768 pixel HD LCD Panel with high contrast ratio and wide viewing angle. O VIZON Engine VIZON Engine, SANYO High Quality Image Processing Technology reproduces clear, dynamic, natural and realistic picture along with HD LCD Panel Technology. X Sound O NICAM/A2 Stereo It's the Stereo Sound PAL Color TV Broadcasting System upgrading mono-sound TV service to stereo or dual-language sound.
PREPARATION PART NAMES AND FUNCTIONS FRONT Panel Side Controls Indicator INDICATORS Power Indicator Timer Indicator Infrared Remote Receiver CARE FOR USING LCD TV Ɣ Do not bump or scratch the panel surface as this causes flaws on the surface of the screen. Ɣ There may be some tiny black points and/or blight points on the SCREEN. These points are normal. 6 LCD-CA9S-A NEW.
PREPARATION SIDE CONTROLS (Each button on the control panel has the same function with its counterpart on the remote control. ) &+$11(/ 83 '2:1 Ÿź EXWWRQ Used to Change channels. Used to select items. VOLUME (+/-) buttons Used to adjust the volume. Used to adjust the value of the selected item on On- Screen Menu. Used to execute the selected menu on On-screen menu. INPUT MODE button Used to select input source: PC, HDMI2, HDMI1, TV, AV1-S, AV2-DVD.
CONNECTING LCD TV CONNECTING THE AC POWER CORD This LCD TV uses nominal input voltages of 110-242V AC. This LCD TV automatically selects the correct input voltage. It is designed to work with single-phase power systems. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the LCD TV with all peripheral equipment before turning the LCD TV on.
CONNECTING LCD TV CONNECTING A COMPUTER Cable used for connection (This cable is not supplied with this LCD TV.) Ɣ PC/VGA Cable (D-SUB 15pin) Ɣ HDMI Cable: HDMI Input Ɣ MAC Adapter (in the case of connecting Macintosh computer) Ɣ Audio Cable [Mini Plug (L/R)] IBMcompatible computers or Macintosh computers (VGA / SVGA / XGA ) Desktop type NOTE: When connecting the cable, AC Power Cords of both LCD TV and external equipment should be disconnected from AC outlet.
CONNECTING LCD TV CONNECTING VIDEO EQUIPMENT Cables used for connection (These cables are not supplied with this LCD TV.) Ɣ Video Cable(RCA X1), S-Video Cable, Audio Cable (RCA X2) : Video 1 or Video 2 Ɣ Video Cable(RCA X3), Audio Cable (RCA X2) : DVD (Component Video) Ɣ Video Cable(RCA X1), Audio Cable (RCA X2) : Monitor Outputs Ɣ HDMI Cable: HDMI Input NOTE : When connecting the cable, AC Power Cords of both LCD TV and external equipment should be disconnected from AC outlet. DVD video equipment.
BEFORE OPERATION OPERATION OF REMOTE CONTROL INPUT button POWER ON/OFF button PIP button MAIN/SUB button ECO button CHANGE button TIMER button NUMERIC buttons Display button DIGIT button MUTE button 32,17 Ÿ/ź/Ż/Ź button CHANNEL RECALL button STILL button MENU button SOUND SYSTEM button BACK button COLOUR SYSTEM button WIDE button STEREO/MONO button SPORTS button VIDEO MODE button AUDIO MODE button TXT/TV button BASS button Note: 1.
BEFORE OPERATION OPERATION RANGE 15 15 Point Remote Control toward LCD TV (Infrared Remote Receiver) whenever pressing the buttons. Maximum operating range for Remote Control is about 16.4’ (5m) in front, about 30° to the left or the right, about 15° for up or down. 30 Infrared Remote Receiver 30 5m REMOTE CONTROL BATTERIES INSTALLATION 1 3 Remove the battery compartment cover . 2 Insert two size AAA batteries (1.5V) according to "+" and "-" polarity markings inside the battery compartment.
BEFORE OPERATION ON-SCREEN MENU TV/AV MODE MENU LIST Note: "CHANNEL" menu is only active in TV mode. MAIN MENU (CHANNEL MENU) CHANNEL MENU PICTURE MENU SOUND MENU SOUND MODE BASS 50 TREBLE 50 BALANCE 50 SEL ADJ BACK BACK MENU EXIT 13 LCD-CA9S-A NEW.
BEFORE OPERATION ON-SCREEN MENU TV/AV MODE MENU LIST MAIN MENU (CHANNEL MENU) TIMER MENU OFF --:-29 OFF TIMER ON TIMER ON TIMER CH SELECT SEL ADJ ADJUST BACK BACK MENU EXIT OSD MENU LANGUAGE H-POSITION V-POSITION DURATION 15 SEC TRANSPARENCE TTX LANGUAGE SEL WESTERN BACK ADJ MENU BACK EXIT SYSTEM MENU ECO CHILD LOCK PC ADJUST ＳＥＬ Ａ ＤＪ ＢＡＣＫ ＢＡＣＫ ＭＥＮＵ ＥＸＩＴ 14 LCD-CA9S-A NEW.
BEFORE OPERATION ON-SCREEN MENU PC/HDMI MODE MENU LIST MAIN MENU (PICTURE MENU) SYSTEM MENU ECO CHILD LOCK PC ADJUST AUTO ADJUST H-POSITION ＳＥＬ Ａ ＤＪ ＢＡＣＫ ＢＡＣＫ ＭＥＮＵ ＥＸＩＴ START V-POSITION CLOCK PHASE SEL ADJ BACK BACK MENU EXIT Note: 1. "PC ADJUST" is only active in PC mode. 2. SOUND/ TIMER/ OSD menu in PC/ HDMI mode is the same as TV/AV mode, please refer to pages 13~14. 15 LCD-CA9S-A NEW.
BASIC OPERATION TURNING ON / OFF LCD TV 1 Complete the peripheral connections before turning on LCD TV. (Please refer to "CONNECTING LCD TV".) 2 3 Connect LCD TV's AC Power Cord into an AC outlet. Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON. The POWER indicator will light up (green). Press POWER ON/OFF button again to shift it to stand-by status, the POWER indicator will become red. NO SIGNAL SHUT OFF This TV set incorporates the NO SIGNAL SHUT OFF function.
BASIC OPERATION SOUND SYSTEM Press SOUND SYSTEM button repeatedly to select "D/K", "I", "M" or "B/G" until the best sound effect is reached. COLOUR SYSTEM Press COLOUR SYSTEM button repeatedly to select "AUTO", "PAL", "SECAM", "NTSC" or "NTSC4.43" until the best colour effect is reached. DISPLAY Press DISPLAY button on Remote Control to display the status of LCD TV. Press again to remove the display.
BASIC OPERATION VIDEO MODE Simply press VIDEO MODE button on Remote Control to select the following video signals: PERSONAL User presets picture adjustment in Picture mode. PERSONAL STANDARD Natural and splendid picture level preset on this LCD TV. STANDARD DYNAMIC DYNAMIC Bright and dynamic picture. It is suitable for nice playback, such as DVD program. SOFT SOFT Inhibit strong contrast and colour, it is beneficial for eye protection.
BASIC OPERATION WIDE Select screen size among "Full", "Zoom", "Zoom[Caption-IN]", "Normal" and "Natural Wide" by pressing WIDE button on Remote Controls. WIDE button Full * Zoom * Only "Full" mode can be selected when the input mode is "VGA" , "HDMI" or "DVD" and the input signal is 1080i, 720p or 1080p. Full Provides image to fit width of screen by expanding image width uniformly. This function can be used for enjoying a squeezed video signal with wide video aspect ratio of 16 : 9 screen.
BASIC OPERATION OFF TIMER To set OFF TIMER by pressing TIMER button on Remote Control. The timer dialogue box will appear on the screen for a short while. To select "0 min", "30 min", "60 min", "90 min" or "120 min" with TIMER buttons. PIP OPERATION Using PIP function, you can enjoy a TV program and an image such as DVD input from a rear terminal at the same time. 1 2 3 Press PIP button to display sub picture. 4 Press CHANGE button in PIP mode can switch input source in Sub picture.
BASIC OPERATION OPERATION OF REMOTE CONTROL (IN TEXT MODE) POWER ON/OFF button TEXT INDEX button TEXT CANEL button NUMERIC buttons TEXT REVEAL button TEXT SUBCODE button MUTE button PAGE UP (Ÿ) button TEXT SIZE button VOLUME (Ż button VOLUME (Ź) button PAGE DOWN (ź) button TEXT HOLD button TXT/TV button TEXT RED button TEXT BLUE button TEXT GREEN button TEXT YELLOW button Note: In different mode, some buttons have different functions. (For details, please refer to page 11.
BASIC OPERATION TEXT/ TV Press TXT/TV button to select teletext. Press again will display: Ŷ 79 PRGH 79 ĺ 7(;7 PRGH ĺ 0,; PRGH ĺ 79 Ŷ $9 PRGH $9 ĺ 7(;7 PRGH ĺ 0,; PRGH ĺ $9 Note: Ŷ TEXT mode: TEXT screen is displayed. Ŷ MIX mode: TV/AV (broadcast image) screen and the contents of TEXT(it superimposed) are displayed simultaneously. Ŷ CANCEL mode: TEXT/MIX MODE is canceled temporarily and broadcast image is displayed. However, the available key are the same as TEXT mode.
BASIC OPERATION TEXT SIZE Press TEXT SIZE button to enlarge the top half of the text page. Press TEXT SIZE button again to enlarge the bottom half of the text page. Press TEXT SIZE button again to return to the normal size page. 1RUPDO ĺ WRS KDOI HQODUJHPHQW ĺ ERWWRP KDOI HQODUJHPHQW ĺ QRUPDO Note: Ŷ During the top half enlargement or the bottom half enlargement mode, if a page request is performed by [0] - [9] button and the TEXT INDEX button, it will become the normal mode and a page will be requested.
MENU OPERATION (TV/ AV mode) CHANNEL Note: Ɣ The CHANNEL menu doesn't work except for TV mode. Ɣ In PIP mode, the CHANNEL mode doesn't work except for 1 2 3 SCREEN MENU the main picture is TV mode . Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "CHANNEL", and will display CHANNEL menu. Press POINT Ÿź buttons to select the item desired. Press POINT Ż Ź buttons to adjust value. Ŷ Press BACK button to return to the previous menu.
MENU OPERATION (TV/ AV mode) COLOUR SYSTEM The setting for colour system is only active in TV or AV mode. Usually, the colour system is set to the position of "AUTO". In case of abnormal colour, repeatedly press POINT Ż Ź buttons to select "AUTO", "PAL", "SECAM", "NTSC" or "NTSC4.43" until the best colour effect is reached. SOUND SYSTEM The setting for sound system is only active in TV mode. Press POINT Ż Ź buttons repeatedly to select "D/K", "I", "M" or "B/G" until the best sound effect is reached.
MENU OPERATION (TV/ AV mode) PICTURE 1 2 3 Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "PICTURE", and will display PICTURE menu. Press POINT Ÿź buttons to select the item desired. SCREEN MENU Press POINT Ż Ź buttons to adjust value. Ŷ Press BACK button to return to the previous menu. Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation. Note: Ɣ TINT cannot be adjusted when HDMI input.
MENU OPERATION (TV/ AV mode) SOUND 1 Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "SOUND", and will display SOUND menu. 2 3 Press POINT Ÿź buttons to select the item desired. Press POINT Ż Ź buttons to adjust value. Ŷ Press BACK button to return to the previous menu. Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation.
MENU OPERATION (TV/ AV mode) TIMER 1 2 3 Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "TIMER", and will display TIMER menu. Press POINT Ÿź buttons to select the item desired. SCREEN MENU OFF TIMER ON TIMER ON TIMER CH OFF --:-29 Press POINTŻ Ź buttons to adjust value. Ŷ Press BACK button to return to the previous menu. Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation.
MENU OPERATION (TV/ AV mode) OSD SCREEN MENU 1 Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "OSD", and will display OSD menu. 2 3 Press POINT Ÿź buttons to select the item desired. LANGUAGE Press POINT Ż Ź buttons to adjust value. TRANSPARENCE TTX LANGUAGE H-POSITION V-POSITION DURATION Ŷ Press BACK button to return to the previous menu. Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation.
MENU OPERATION (TV/ AV mode) SYSTEM 1 Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "SYSTEM", and will display SYSTEM menu. 2 3 Press POINT Ÿź buttons to select the item desired. SCREEN MENU ECO CHILD LOCK PC ADJUST Press POINT Ż Ź buttons to adjust value. Ŷ Press BACK button to return to the previous menu. Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation.
MENU OPERATION (PC/HDMI mode) PICTURE Note: The screen menu in HDMI mode will be displayed differently under different condition. 1. When the set cannot be received HDMI signal in HDMI mode, the screen menu will be displayed as right picture. 2. But when the set can be received HDMI signal in HDMI mode, the screen menu is different, and the details please refer to page 26. 1 Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "PICTURE", and will display PICTURE menu.
MENU OPERATION (PC/HDMI mode) SOUND 1 Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "SOUND", and will display SOUND menu. 2 3 Press POINTŸź buttons to select the item desired. SCREEN MENU SOUND MODE BASS 50 TREBLE 50 BALANCE 50 Press POINT Ż Ź buttons to adjust value. Ŷ Press BACK button to return to the previous menu. Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation.
MENU OPERATION (PC/HDMI mode) SYSTEM 1 2 3 Press MENU button and the main menu will appear. Press POINT Ż Ź buttons to select "SYSTEM", and will display SYSTEM menu. Press POINT Ÿź buttons to select the item desired. SCREEN MENU ECO CHILD LOCK Press POINT Ż Ź buttons to adjust value. Ŷ Press BACK button to return to the previous menu. Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation.
MENU OPERATION DEALER MODE The Dealer Mode has 7 different modes: VOLUME LOCK, TUNING LOCK, START MODE, OSD, RC, RESET and AC POWER MODE. VOLUME LOCK REMOTE CONTROLS This function is used to limit the maximal volume. Press POINT Ÿ ź Ż/Ź buttons TUNING LOCK The way to prevent user from executing the Tuning function. START MODE The LCD TV will automatically enter to the setting mode while being turned on. You can select "OFF", "TV", "AV1-S", "AV2-DVD", "PC", "HDMI 1" or "HDMI 2" in START MODE.
APPENDIX CLEANING LCD TV Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV. Clean your LCD TV as follows: Ɣ Gently wipe the screen and cabinet with dry soft cloth. Ɣ The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard cloth or paper. Do not use solvents or abrasions. CAUTION : Do not use benzene, thinner, or any volatile substances to clean the LCD TV. These chemicals may damage the cabinet finish.
APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment as described in the section "CONNECTING LCD TV". 2. Check cable connection. Verify that all external equipment and power cords are properly connected. 3. Verify that all power is switched on. 4. If LCD TV still does not produce an image, re-start the external equipment. 5.
APPENDIX TECHNICAL SPECIFICATIONS Model Maximum Visible Range Picture Resolution Viewable Angle(L。/3) Brightness Contrast 'HILQLWLRQ 'HJUHH RI &RORXU &RYHUDJH Mobile Trailer Time Voltage Power Consumption Power Management Colour System Sound System Channel Coverage LCD-32CA9S / LCD-37CA9S / LCD-42CA9S LCD-32CA9S: 81cm (Screen Diagonal Size); LCD-37CA9S: 94cm (Screen Diagonal Size); LCD-42CA9S: 106cm (Screen Diagonal Size); 1366(H) x 768(V) L/R:+/- 89D, U/D:+/- 89D 500cd/m² 1500:1 5) $QDORJ 6LJQDOV +RUL
APPENDIX CONFIGURATIONS OF VGA TERMINALS VGA IN (D-SUB) TERMINAL Terminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting Macintosh computer, the MAC Adapter (not supplied) is required. 1 2 3 4 5 6 7 8 Pin Configuration 4 5 10 15 2 3 9 14 8 13 1 7 12 6 11 Red Input Green Input Blue Input Sense 2 Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 No Connect Ground (Vert.sync.
APPENDIX When input signal is digital from DVD terminal, refer to the chart below. When input signal is digital from HDMI terminal, refer to the chart below. NO. Frame Frequency Resolution Audio Freq. Format : 16bit/20bit/24bit HDMI™ (V.1.3 with Deep Color) TABLE OF TOXIC ELEMENT FOR PRODUCTION Toxic Element Parts Name Plastic Display Screen Circuit Board Hardware Copper Alloy Remote Control Other Parts ( eg.
APPENDIX Uninstalling Stand Base CAUTION IN UNINSTALLING STAND BASE Ɣ Through in uninstalling work, handling with more than two people is recommended. Ɣ When holding (moving or lifting) the LCD Display, hold the display's body. Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage. Ɣ Before uninstalling, provide a desk (or a part of it) which is strong enough to support the weight of the LCD TV and this stand.
APPENDIX Uninstalling Stand Base (Continued) 4 Cover the holes where you remove the stand base from the dust etc. by paste the deck label (supplied) to these holes. 5 Uninstalling the stand base is completed now. 41 LCD-CA9S-A NEW.
Note 42 LCD-CA9S-A NEW.
Note 43 LCD-CA9S-A NEW.
Part No. 1AA6P1P5592-A N5EV-A (UH3-B) LCD-CA9S-A NEW.indd 44 SANYO Electronics CO., Ltd.
