User Guide

100 Section 2I. Voice Services
Setting Up Screen Call
You can screen incoming calls by using a recorded
announcement, either a prerecorded one or one that
you record. You can also record the caller’s message.
Activating Screen Call
To start Screen Call when you have an incoming call:
©
When the phone rings or vibrates, press Options
(right softkey) > Screen Call.
To screen calls automatically:
1. Select and press > Tools > Voice Memo >
Screen Call > Auto.
2. Select On.
3. Set the answer delay.
4. Press OK (left softkey).
(The icon is displayed on the screen.)
Selecting an Announcement for
Screen Call
1. Select and press > Tools > Voice Memo >
Screen Call > Announcement.
2. Select Pre-Recorded or Custom.
Recording Your Name for a Prerecorded
Announcement
You can use a prerecorded announcement with or
without yourname. If you record your name, your phone
adds it to the prerecorded announcement that you are
not available to answer calls.
1. Select and press > Tools > Voice Memo >
Screen Call > Announcement
.
2. Highlight Pre-Recorded and press Edit (right softkey) >
Record Name.
3. Press to start the first recording. (Press to
stop recording. The maximum recording time is 12
seconds.)
4. After the first recording, press again to start the
second recording.
5. Press to stop recording.
Tip
While the caller’s message is being recorded, press
TALK to answer the call, or press END to stop
recording and disconnect the call.