User Guide

96 Section 2I. Voice Services
Checking Phone Status Using ASR
You can use ASR to obtain information about your
phone:
v
My Phone Number
v
Network
v
Signal Strength
v
Battery
v
Status (all of the previous except My Phone Number)
1. Press and hold or .
2. If you hear “Say a command,”say “Check.”
3. If you hear “Which status item?,”say a command.
ASR Options
To change ASR confirmation:
1. Press and hold or .
2. Press Settings (right softkey) > Confirmation and
select an option.
n
Automatic to ask for confirmation only when the
system is not sure what you said.
n
Always Confirm to always ask forconfirmation.
n
Never Confirm to never ask for confirmation.
To adapt the system to your voice:
1. Press and hold or .
2. Press Settings (right softkey) > Adaptation >
Adapt Voice.
3. Press Start (left softkey) and repeat each word,
phrase, or telephone number you hear.
To reset the adaptation:
1. Press and hold or .
2. Press Settings (right softkey) > Adaptation >
Reset Voice > Yes (left softkey).
To change the ASR mode:
1. Press and hold or .
2. Press Settings (right softkey) > Modes and select an
option.
n
Expert Mode to sound a beep only.
n
Prompt Mode to prompt forrequired information.
n
Readout Mode to prompt forrequired information
and to read aloud the content displayed on the
main screen.