User Guide

Phone Basics
2A. Phone Basics 21
Key Guard
To avoid accidentally pressing a key, this feature
enables you to lock the touch keypad and side buttons
while the phone is closed. By default, your phone’s key
guard feature is set to
On. Whenever the key guard is
on, you must first turn the key guard off to unlock the
keypad and use your phone.
To turn off the key guard manually:
䊳 Slide the Power/Lock button ( ) down.
䡲 To turn the key guard back on, slide down
again. (You will see
“Keyguard On” on the screen.)
To turn off the key guard from the main menu:
1. Highlight and press > Settings > Keyguard >
Off.
2. Read the message and press DONE (left softkey).
Touch Vibration
You can make the touch keypad vibrate to confirm
when a key is touched.
1. Highlight and press > Settings > Volume >
Touch Vibrate.
2. Select On or Off.
Making and Answering Calls
Making Calls
Using the External Keypad
1. Enter a phone number from standby mode. (If you
make a mistake while dialing, touch to erase
the numbers.)
2. Touch .
3. When you are finished, touch .
Using the Internal Keypad
1. Enter a phone number from standby mode. (If you
make a mistake while dialing, press or to
erase the numbers.)
2. Press or .
3. Press when you are finished.
Note
Turning the key guard off may cause high battery
consumption and accidental key presses or dialing.
Note
If Parental Controls are on and Voice Calls are
restricted, incoming and outgoing call will be limited
to only certain phone numbers. (See page 57.)