CONTENTS e EY Time Search [DVD] . L E2 Time Search {Video CD} [CD] . E3 Track Search [Video CDY, [CD]. Fast Playback Slow Motion Playback . Still Picture {Gauss) . . Frame by Frame Advance Playback Viewing from a Desired Camera Angle {Multi-Angle) Angle Replay Normal Repeat Play . Designated Range Repeat Play (A-B Repeat Accessories Safety Certification Controls .. Multi brand Universal Remote Control; Before Connection .. . Choosing a Connection Basic Connections .
CAUTION ASK OF ELECTRIC SHOCK 00 NOT DEN This symbol indicates that dangerous voltage constituting asterisk electric shocks present within this unit CAUTION: 70 PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
CONTROLS Front panel SRR Power button/Standby indicator (1/ON, STANDBY} 6. Stop button (STOP} 2. Disc tray 7. Play button (PLAY) 3. Open/Close button {OPEN/CLOSE) 8. Display 4. Pause/Step button (PALIMPSEST) 8. Headphone volume control {PHONE LEVEL) 5. Skip/Next/Pravious buttons (-6 ww} 10, Stereo earphones jack (PHONES) Display 8910 PROPAGANDA J sy ANGLE DOLBY 15 14 1. Last memory indicator (LAST MEMO) 8. PCM kHz sampling frequency indicator (kHz) 2. Playback control indicator for Video CD (PBC) 10.
MULTI BRAND UNIVERSAL REMOTE CONTROL Controls 1. On screen display button (ON SCREEN) . Power button { Loony 3. Last memory button (LAST MEMO) 4. Encyclopedic button (OPEN/CLOSE) 5. Angle bunion (ANGLE) 6. Angle replay button (ANGLE REPLAY) 7. Menu button (MENU} 8. Audio button (AUDIO) 9. Joy-stick (ENTER, Return button (RETURN) 11, Forward slow bunion (FWD SLOW) 12, Forward Hutton (FWD) Skip/Next button (NEXT) Stop bunion {STOP) Number buttons +10) . Clear button (CLEAR} .
To set the remote control code for TV This remote control can operate the basic functions of TVs made by the manufacturers listed below. To enter the remote control code for your brand of TV follow the steps below. 1. In the chart below. find the code corresponding to your brand of TV, 2.
BEFORE CONN SECTION discs are copy protected. Choosing a Connection TV Connection TV and Amplifier Connection VIDEO Connection AUDIO Connection Need help? Call 1-800-421-5013 IMPORTANT INFORMATION: « To connect this DVD video player must have a set of Audio/Video composite input jacks (RCA-type). | You cannot use an antenna terminal to connect this DVD video player. » 1f your TV has only an RF input jack, please purchase the TV with Audio/Video input jacks.
BASIC CONNECTIONS Connecting to a TV (Example 1) Connect the DVD video player to your TV, This is the easiest way to hook up the DVD video player Set the VIDEO OUT SELECT switch to the VIDEO/S VIDEO position, Nate: If you change the switch position. disconnect the AC power cord first.
ADDITIONAL CONNECTIONS EXAMPLES Connecting to an Audio System and TV (Example 2) Connect the DVD video player to an Audio System and TV. OVD video player Set the VIDEO QUT SELECT switch 10 the VIDEO/S VIDEO position, Note: If you change the switch position disconnect the AC power cord first. Then change the switch position.
Notes: + For VIDEO connection, please refer to “BASIC CONNECTION"” on Page E7. + Please refer to the instructions provided with your amplifier, + When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have bean made. Connecting to an Amplifier with 5.1 Channel Discrete Audio Input (Example 3) This DVD video player has a Dolby Digital Decoder. You can enjoy Dolby Digital sound. Amplifier with 5.
Connecting to an Amplifier with Dolby Pro Logic Decoder (Example 5) ) “Audio cable (not supplied) To MIXED 2CH AUDIO OUT —C To CUBIC INPUT Amplifier with Dolby Pro Logic Decoder Center speaker speaker Front heft speaker I Sub woofer — ) Surround left speaker € yo— Surround right speaker VR, *Please consult your local audiovisuals dealer, To enjoy Dolby Pro Logic sound Select "DOLBY DIGITAL: PCM" in “Digital out” on the INITIAL SETTINGS.
Connecting to an Amplifier with MPEG Decoder (Example 7) “Apical cable (ot supposed Amplifier with MPEG decoder = = To digital audio input Center speaker To DIGITAL r ’ out z;zglfji S\u\b\\wooter , Before connecting. remove the ! protective cap from the jack. Replace the cover if there is no device connected to this jack. Surround left speaker Surround right speaker *Please consult your local audiovisual dealer. To enjoy MPEG sound Select "MPEG: BIT STREAM" in *Digital out” on the INITIAL SETTINGS.
Listening with Headphones Connect a pale of stereo headphones with a 1/4" plug (not available from FISHER) to the PHONES jack for monitoring or for private glistering. = Set the PHONE LEVEL control to the "MIN® position before connecting the headphones. + Set“DOLBY DIGITAL: PCM" in “Digital out” on the INITIAL. SETTINGS. (See Page E26.) Use the PHONE LEVEL control {o adjust the volume of the headphones. Turn the control counterclockwise to decrease the volume.
PLAYABLE DISCS The following types of discs can be played on this unit Disc type and logo mark Recorded | pig size Maximum playing time content inches Approx. 4 hours (Single sided dies) Audio {12 em) Approx. 8 hours {Double sided disc) DVD Video DVD + A Video inches Approx. 80 minutes (Single sided disc) {clammy Approx. 160 minutes {Double sided disc} $inches COMPACT é Audio (12 em) 74 minutes Video CD 5 4 VIDEOED | wigeon | niches | (version 2.
BASIC OPERATION Before Starting = Tum on the power {TV. Audio System, AV amplifier, et} e control for V. To use re Note You must set the remote central code for TV first. (See Page E5.) 1. Press {TV POWER] to turn on the power + When using the remote control, the Transmitter | Window on the remote control must be pointed toward | your TV, i 2. Press [EVIDENT] to select the video input source. : 3. Press [TV VOL +] or [TV VOL -, if necessary.
Stopping Play Press [STOP] during playback. i briefly appears on the TV screen... When you press [PLAY] again, playback starts from the beginning of the disc. briefly appears on the screen 1f “Resume W” briefly appears on the TV screen... When you press [PLAY] again, playback starts automatically from the pant where you stepped. " briefly appears on the screen. {Resuming Playback) Notes: + Some discs may not start resuming playback « pressed twice, the player stops completely.
Chapter (Track) Skip Forward/Skip Back Skipping forward Crass [NEXT] {or W) during play to skip to the next chapter {or track). appears on the screen. A chapter (or track) is skipped each time the button is pressed Skipping back Press [PERV] (or [0} during play to skip back to the beginning of the chapter {or track} currently play. "€ appears on the screen. Press the bunion again immediately to skip back to the beginning of the previous chapter (or track).
Time Search [viced CD). [CD} 1. Press [SEARCH MODE] once during playback. “TIME SEARCH" screen appears. 2. Press the number button(s) to enter the time Example: 20 minutes 5 seconds Press [2], [0], [0] and [5]. 42 minutes 39 seconds Crass [4], [21, (3] and [8]. 1 hour 4 minutes 35 seconds Press [1]. [0], [4), [3] and [8] Notes: + Do not use the [+10] button. + I you made a mistake, press [CLEAR]. 3. Crass [PALLY Playback starts from the searched time in the selected track.
Fast Playback Fast forward playback Press [FWD] repeatedly to select the fast speed forward playback. 3 steps for Video “FF2” and "FFY” 2 steps for Music CD: “FF1” and "FF2" Press [PLAY] to return to normal playback. Fast reverse playback Press [REV] repeatedly to select the fast speed reverse playback 3 steps for Divides CD: "FR, “FA2" and "FR3” 2 steps for Music CD: "FR1" and “FH2" Press [PLAY] to return fo normal playback Note: The sound is muted during fast playback in DVD and Video CD.
Frame by Frame Advance Playback [DVD), [Video CD] Press [AUSTERER] during still picture. * 1R appears on the screen. Each time the bunion is pressed, the picture advances one frame, Crass [PLAY] to return to normal playback. Notes + The sound is muted. + Frame playback is operated forward only. Viewing from a Desired Camera Angle (Multi-Angle) Some DVD video discs may contain scenes which have been shot simultaneously from a number of different camera angles.
Normal Repeat Play Press [REPEAT] during playback {or programmed play} of the title {or track) you want lo repeat. Each time the button is pressed, the repeat mode will be changed as folios. [DVD] < Title (REPEAT 13: Repeat of title being played <5 Off: Normal play mode [Video CDJ.
Programmed Play [video CD). (CD] Up to 32 selections can be programmed. Programming procedure 1. Press [PROGRAM] in the stop mode. * "PROGRAM screen appears. + “PROGRAM blinks and “Pr 1" appears on the display 2. Press the number bunions to select the track burner. Example: To defect Track No.3, press (3]. To select Track No. 10, press then [0]. To select Track No.24, press then [4]. Note: if you made a mistake, press “CLEAR".
Selecting a Title Menu Notes: » The operation may differ depending on the disc used » Selecting a title may not be possible on some discs. 1. Press [TITLE]L The title menu will be appeared. Note: Press [TITLE} again to resume play from the scene when {TITLE] was first pressed. 2. Press the number buttons) to select the desired title. 3. Press [ENTER]. The selected title playback starts Selecting a DVD Menu Notes: + The operation may differ depending on the disc used.
Selecting Subtitle Language This operation works only with discs on which multiple subtitle languages are recorded. 1. Press [SUBTITLE] during playback. “SUBTITLE CHANGE" screen appears. 2. Press [A]to select "On”. The language is highlighted. Example: SUBTITLE CHANGE On A Rev. €02 FRENCH w Next ¥ off 3. Press select the desired subtitle language. 4. Press [SUBTITLE] Notes: » in some cases, the subtitle language is not changed fo the selected one.
Selecting On-Screen Information Press [ON SCREEN] repeatedly to show the disc information {Title, Chapter, Title elapsed playing time, Language. etc ). Example for DVD: 1. Press [ON SCREEN]. Title elapsed playing time ovo Ti tie: 1 Chapter: 4 By pressing (4] or the Title or Chapter information changes Y Chapter elapsed playing time DVD Title: 1 Chapter: 4 2. Press [ON SCREEN] Title remaining playing time DVD ] THe: 1 Title CI.Chapter: 4 A By pressing [A] or the Title or Chapter information changes.
INITIAL SETTINGS Once the initial settings have been completed, the player can always be operated under the same conditions. The settings will be retained in the memory until they are changed. even if the power is muted off. Common Procedures of initial Settings 1. Press [SET UP}in the stop mode. "SET UP MENU {Language, Display, Digital out, Speaker and Parental)’ appears on the TV screen. 95»; UFO) fi Language| | Display Speaker| {Parental g UL Digital out 2. Press [« or ).
If the optical DIGITAL OUT jack is connected to the amplifier. you “‘ Al must set as follows: Digital out kHz LCM (kHz Liner Pulse Cord Modulation: Wuhan the disc with kHz sampling Is played back, select kHz LCM: OFF, kHz PCM “kHz PCMCIA. If not, select “OFF” DOLBY DIGITAL: PCM, BIT STREAM Note: DTS, OFF, ON When “kHz PCM" is set, there are kHz PCM audio signals MPEG PCM, BIT STREAM from the MIXED 2CH AUDIO OUT, 5.
o Parental ENTER PASSWORD Enter a number in 4 digits. then press “ENTER" To confirm, enter password again, then press "ENTER” Mi valid password (Enter a number In 4 digits.
Enter the appropriate code number for the initial settings "AUDIO”, *SUBTITLE" and “DVD MENU".
TROUBLESHOOTING GUIDE If you have followed the instructions and are having difficulty operation the unit. locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem. SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION No power. No power piling connection at the AC waif ol Insert the ooy nto the AC wall outlet The pouter is on, but the player does not work No disc is loaded.
MAINTENANCE Cleaning the cabinet Use a clean soft cloth moistened with plain lukewarm water and wrung dry. Never use benzyl. benzene or other strong chemical cleaners since these could damage the finish of your unit. It is important that no liquid reaches the snide of the unit, WARNING: FOR YOUR PERSONAL SAFETY.
! FISHER AUDIO MODEL DVD-52000 LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Fisher Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Fisher Service Centers may be obtained by calling the til-free number listed below. For product operation.
