CO U RECYC IN F O ee NYO TE EVI I N c e 9 c a g e CO TIE E MP R DE MER URIO DE E H R O RECIC AJE DE TE EVISORES S NYO e e e 9 c c e e CO J T E 7 e e q r e e a e 0
English Thank you for choosing SANYO. Please read all instructions to obtain maximum benefit of your product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITH THIS UNIT. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION English This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
English CONTENTS IMPORTANT SAFETY INSTRUCTIONS...2 HELPFUL HINTS - Problems / Solutions .28 FCC INFORMATION...................................3 SPECIFICATIONS ................................... 29 ENERGY STAR® USER INFORMATION..3 CONFIGURATIONS OF VGA TERMINALS ...................................... 30 TRADEMARKS...........................................3 PROTECTING THE LCD SCREEN..............3 HANDLING PRECAUTIONS........................3 INSTALLING AND UNINSTALLING STAND........................
INSTALLING AND UNINSTALLING STAND CAUTION INSTALLING STAND English • When holding (moving or lifting) the LCD Display, hold the display’s body. Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage. • Before installing, provide a desk (or a part of it) which is strong enough to support the weight of the LCD TV and its stand. The desk must be larger than the LCD Display's screen size.
INSTALLATION English POSITIONING THE LCD HDTV Always use a firm-flat surface when positioning your HDTV. Do not position the unit in a confined area. Allow adequate space for proper ventilation. 52.3 4 36.5 33.5 3 14.9 29.3 NOTE: All dimensions are in inches. * Diagonal screen: 54.6 inches WALL MOUNTING (OPTIONAL) Use the screws that are threaded into the standmounting inserts on the back of your HDTV to secure it to a wall mounting kit. NOTE: 1. Wall Mounting kit is not supplied. 2.
GETTING STARTED Install batteries in the Remote. English 1 PReCAUTIONS Do not use rechargeables together with dry cells, other types, mixed new and old or batteries with different charge levels. Do not expose the Remote or batteries to moisture or heat such as sunshine. (the size of battery is AAA). Match the “+” and “-” signs on the batteries with marks inside the Remote Control. Please recycle used up batteries. 2 Antenna Connection for off-air signals.
English GETTING STARTED-CONTROLS AND JACKS LEFT-SIDE PANEL BACK-SIDE PANEL Y PC AUDIO INPUT PC INPUT Pb Pr Pb L Pr R L Y/VIDEO DV INPUT1 L INPUT2 ANT R R DEO3 INPUT V DEO2 INPUT V DEO 1 NPUT Input / OK button COMPOSITE VIDEO INPUT VIDEO1, PAGE 10 - Standard (composite) video and audio inputs while using video devices with analog audio and composite video output.Connect digital video equipment to the Video Yellow jack, and matching Audio White (L) and Red (R) jacks.
REMOTE CONTROL OPERATION English MUTE Button- Press to mute or restore the sound. Numeric Buttons- Press numeric buttons to select a channel. Example: Press 6 then OK button to select analog channel A6. Press 6 then 1-- button to select digital channel D6. INPUT Button- Press to select the source to view: TV, VIDEO1, VIDEO2, VIDEO3, HDMI1, HDMI2, HDMI3, PC or USB Input. SPORTS Button- Press to choose options Football, Winter Sports, Marine Sports, Indoor Sports, and Off in turn.
GETTING STARTED-CONNECTIONS English 3 Analog Signal Connections - VIDEO1 or VIDEO2 (Shared with Component-Y). Connect an analog device such as an Analog Cable Box, Satellite Receiver or VCR. Composite connectors are included on your HDTV to provide continued compatibility with older analog devices such as a VCR. (Cables are not supplied) 1 Connect an AV cable to the VIDEO1 or VIDEO2 jack on the HDTV and to your analog AV equipment as shown. Match the connector colors to jack colors.
GETTING STARTED-POWER CONNECTION/CHANNEL SEARCH 5 Plug in AC power cord (120V AC, 60Hz) 6 Press the POWER button, (Follow the on-screen instructions). English POWER CONNECTION To 120V AC outlet. INITIAL setup 7 Use the CURSOR ▲ and ▼ buttons to highlight Store or Home. Press the OK button. TVs will enter INITIAL CHANNEL SCAN automatically. Store : This mode is for the retail display setup. Home : This mode qualifies for ENERGY STAR.
English ADVANCED AV CONNECTIONS ADVANCED DIGITAL SIGNAL CONNECTIONS-HDMI TO HDMI DIGITAL AUDIO Connect compatible Digital devices such as a HD Cable Box, HD Satellite Receiver, DVD Player, and Game System. NOTE: NOTE: Dolby Digital audio signal is available from the Digital Audio output terminal only when receiving a part of a Digital input on the screen. HDMI-High-Definition Multimedia Interface. 1 Connect the Digital Audio output to a multichannel receiver as shown.
PC CONNECTIONS 1 Connect a RGB cable from the monitor output on your PC to the RGB connector on the HDTV and tighten the screws. (Monitor Cable not supplied). 2 Insert one end of a Stereo Mini-Audio cable into the PC Audio Out jack and the other end into the HDTV PC AUDIO INPUT jack. (Stereo Mini-Audio Cable not supplied). HINT: Volume can be adjusted both from the PC and the HDTV VOLUME + / - buttons. 3 Select Auto Adjustment from the PC Setup Menu.
SPORTS MODE English By simply pressing the “ SPORTS“ button on the remote control, the TV will automatically optimize both picture and sound settings for the programs shown. ■■ Off ■■ Football −− For golf, football programs etc. −− Fresh greenness of the lawn −− Enfolding cheering voices, ball hitting sounds ■■ Winter Sports −− For skiing, ice skating programs etc. −− Details kept white, vivid color of costume −− Enhanced skiing/skating sounds ■■ Marine Sports −− For swimming, diving programs etc.
ON-SCREEN MENU OPERATION CHANNEL ADJUSTMENT MAIN MENU SUB-MENU OPTIONS SIGNAL SOURCE OPERATION English MENU NAVIGATION MAP There are two categories: ● Air ● Cable AIR(Antenna) Search: It will search for analog and digital channels that are broadcasted over-the-air. Cable Search: It looks for analog cable channels and unscrambled (Clear QAM) digital cable channels. 1 Press the MENU button on the remote control to display the Main menu. Use the CURSOR ◄ and ► buttons to highlight CHANNEL.
ON-SCREEN MENU OPERATION (CONTINUED) English CHANNEL LIST OPERATION 1 The Channel List is a database of active channels you can scan through using the CURSOR ▲ and ▼ buttons. Customize it by deleting or adding channels. Use the CURSOR ▲ and ▼ buttons to highlight the Channel List. Press the OK button. 2 Use the CURSOR ◄ and ► buttons to change pages. 1 Press the MENU button on the remote control to display the Main menu.
ON-SCREEN MENU OPERATION (CONTINUED) This SANYO television is equipped with an electronic V-Chip to interpret MPAA (Motion Picture Association of America) and TV Parental Guidelines rating codes. When these codes are detected, the HDTV will automatically display or block the program, depending upon choices you make when setting up the PARENT menu. Use this feature to automatically block programs with content you deem as inappropriate for your children to view.
English ON-SCREEN MENU OPERATION (CONTINUED) MPAA OPERATION V-Chip Adjust OPERATION MPAA- Decides which kind of classified movie rating signal can be viewed. ADVANCED- For V-chip Regional Rating5(RRT5). An advanced V-Chip ratings system for digital channels that are received with an antenna. When the HDTV detects compatible RRT5 data, it is downloaded and stored in memory and the menu is modified to include advanced adjustment option.
VIDEO2 OPERATION 1 Press the MENU button to display the Main menu. Press the OK button. PICTURE 2 Use the CURSOR ◄ and ► buttons to highlight PICTURE. Press the OK button. 3 Use the CURSOR ▲ or ▼ buttons to highlight Video2. Press the OK button. 4 Use the CURSOR ▲ and ▼ buttons to select YPbPr or Video. Press the OK button.
English ADJUSTING THE AUDIO LEVELS TREBLE/ BASS/ BALANCE OPERATION 3 Use the CURSOR ▲ and ▼ buttons to highlight HDMI Audio. Press the OK button. 1 Press the MENU button on the remote control to display the Main menu. 4 2 Use the CURSOR ◄ and ► buttons to highlight AUDIO. Press the OK button. Use the CURSOR ▲ and ▼ buttons to select Auto, Digital or Analog option. Press the OK button. (A red hook will appear in the white blank space).
signals usually will not need noise reduction. MPEG NR OPERATION Press the MENU button on the remote control to display the Main menu. 2 Use the CURSOR ◄ and ► buttons to highlight ADVANCED. Press the OK button. 3 Use the CURSOR ▲ and ▼ buttons to select MPEG NR. Press the OK button. 4 Use the CURSOR ▲ and ▼ buttons to select Off, Weak, Medium or Strong. Press the OK button. DYNAMIC AI OPERATION 1 2 3 4 Press the MENU button on the remote control to display the Main menu.
NOTES : • When you select to PC source or USB mode, the120Hz CONDITION default setting is set to Off. English • When display happened double shadow or Outer Glow ,please turn off the 120Hz CONDITION. RESET ADVANCED OPERATION Reset Advanced- Reset the previous adjustment settings under the ADVANCED mode to the factory default value. 1 2 3 Use the CURSOR ◄ and ► buttons to highlight ADVANCED. Press the OK button. Use the CURSOR ▲ and ▼ buttons to highlight Reset Advanced. Press the OK button.
Use the CURSOR ▲ and ▼ buttons to highlight Current Time. 3 Use the CURSOR ▲ and ▼ buttons to highlight Power Saving. Press the OK button. 5 Use the CURSOR◄ and ► buttons to select hour.Press the OK button. 4 Use the CURSOR ▲ and ▼ buttons to highlight Sleep. Press the OK button. 6 Use the CURSOR◄ and ► buttons to select minutes.Press the OK button. 5 Use the CURSOR ▲ and ▼ buttons to select Off, 30 min, 60 min, 90 min, 120 min, 150 min or 180 min. Press the OK button.
English CC STYLE SETTING OPERATION RESET SYSTEM OPERATION CC Style Setting- Caption is a textual information transmitted along with the picture and sound. Reset System- Reset the previous adjustment settings under the SYSTEM mode to the factory default value. Turning captioning ON causes the HDTV to open these captions (Digital or Analog) and superimpose them on the screen (Local broadcasters decide which caption signals to transmit).
USB PHOTO VIEWER Note:CURSOR ◄ ► ▲ ▼ buttons can scroll over the screen only in Zoom mode(x2,x4) English MEDIA BROWSER OPERATION 1 2 3 Press the INPUT button on the remote control and use the CURSOR ▲ and ▼ buttons to highlight USB. Press the OK button. Use the CURSOR ▲ and ▼ buttons to highlight Media Browser. Press the OK button. 5 Use the EXIT button to exit this function. MULTI VIEW (Thumbnail) 1 Use the CURSOR ▲ and ▼ buttons to select Thumbnail. Press the OK button.
English 2 Use the EXIT button to exit this function. SETTINGS (for Slideshow function) OPERATION 1 Use the CURSOR ▲ and ▼ buttons to highlight Settings. Press the OK button. 2 Use the CURSOR ▲ and ▼ buttons to highlight Slideshow Interval. Use the CURSOR ◄ and ► buttons to select 3sec, 5sec or 10sec. 3 Use the CURSOR ▲ and ▼ buttons to highlight Slideshow Effect.
PHOTO VIEWER SPECIFICATIONS Playable media Format FAT16, FAT32 Maximum number of files 10000 Maximum number of folders 1000 File path Up to 260 characters Directory/File name 8 characters Image file format JPEG Base Line format (Supported) with English file name.
HELPFUL HINTS - Problems / Solutions English If you are having problems with your HDTV, check this trouble shooting chart to find one or more possible solutions. Problem: Before returning your HDTV, please visit our website at http://www.sanyoctv.com or call us toll free at 1-800877-5032 We can Help! Check these Conditions: Try these Solutions: • Adjust antenna. • Try a different channel. • There may be a station trouble, no • Execute Channel Scan in the Page No.
SPECIFICATIONS English Maximum Visible Range (H)1209.6 x (V)680.4 mm (54.6" class /138.8 diagonal) Refresh Rate 120 Hz Picture Resolution Full HD 1920X1080 Viewing Angle Horizontal 178° & Vertical: 178° (Panel tentative) Brightness 450(Typical) cd/m2 (Panel tentative) Contrast Ratio 5000:1 (Typical) (Panel tentative) Voltage 120V AC 60Hz AC Power Consumption (average) 342 Watts Color System NTSC3.58 Sound System M Channel Coverage Low band: 54.00 to 144.00MHz Mid band: 145.00 to 424.
English Output terminals Digital Audio Output Audio Output 1 1 CONFIGURATIONS OF VGA TERMINALS VGA IN (D-SUB) TERMINAL Terminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with a VGA Cable (not supplied). When connecting Macintosh computer, the MAC Adapter (not supplied) is required. 1 Red Input 9 2 Green Input 10 +5V NC 3 Blue Input 11 Sense 0 4 Reserved 12 DDC_SDA 5 Reserved 13 Horiz. sync. 6 GND 14 Vert. sync.
