4 Owner’s Manual Table of Contents Manual del usuario 26 Manuel d’instructions 44 Tabla de contenido Table des matières 50” Plasma HDTV TV HD de Plasma TV HD Plasma DP50710 Model No. / No. de Modelo / Nº de modèle © 2010 Sanyo Manufacturing Corporation Part No. / No.
CAUTION THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . 2 FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 TRADEMARKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 PC RESOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STAND REMOVAL ____________ 1 Place HDTV face down on a padded or cushioned flat surface to protect the screen and finish 2 Remove the four (4) screws securing the foot stand. CAUTION: Hold the stand firmly as you remove the last screw. GETTING STARTED BATTERY INSTALLATION Install two (2) “AAA” batteries in the remote control. (Not included) To ensure safe operation, please observe the following precautions: • Replace both batteries at the same time. Do not use a new battery with a used battery.
GETTING STARTED HDTV INPUT/OUTPUT REFERENCE 2 8 3 1 4 An all digital AV interface that can accept uncompressed video signals for the very best picture possible. NOTE: A DVI connection is possible via the HDMI (DVI) INPUT1 jack using an appropriate DVI to HDMI cable or adapter and connecting the audio to the VIDEO3 Audio jacks. 3 USB Input View pictures stored in a USB flash drive. NOTE: HDTV displays only images in JPEG format.
GETTING STARTED AUDIO / VIDEO CONNECTIONS HDMI (DVI) INPUT1 can be used to hookup a DVI device with the use of an appropriate DVI to HDMI cable or adapter. (VIDEO3 Audio in L/R jacks need to be hooked up to the DVI device as well.) Digital Audio Output is used to hookup a multichannel receiver with the use of a phonotype digital audio cable. Component connections will accept SDTV, EDTV and HDTV video signals. Use them for great image quality from digital devices.
GETTING STARTED INITIAL CHANNEL SEARCH Before proceeding, please make sure to hook up your antenna or cable connection and all AV equipment correctly to your HDTV. HOOK UP AC POWER CORD (120V AC, 60Hz) to the HDTV and plug in to AC outlet. TURN ON TV (PRESS POWER BUTTON) Wait for on-screen instructions to set an Initial Energy Saving Mode, and perform an Initial Channel/Signal Search.
REMOTE CONTROL OPERATION • POWER Key—Turns your HDTV On or Off. • INPUT Key—Selects the video source to view. Holding down the key displays the Input List. • ECO Key—Modifies the Energy Saver level (see page 11.) • PIX SHAPE Key—Cycles through the available aspect ratios. The different settings either stretch, zoom, or fill the image on your screen. Bars may appear on top and bottom of your screen (or on left and right sides) depending on the broadcasted signal or program.
ON-SCREEN MENU OPERATION CHANNEL SETTING ___________ Display the On Screen menu and use the CURSOR keys to select Channel Setting. Press ENTER. Channel Search Auto – Searches the detected mode, Cable or Air. Cable – Searches for analog and unscrambled (ClearQAM) digital cable channels. Air (Antenna) – Searches for analog and digital off-air channels. Digital Add-On – Searches digital off-air channels adding newly found digital channels to the channel map database.
ON-SCREEN MENU OPERATION Video2 Setting Use this feature to establish either a Component or Composite connection to the VIDEO INPUT 2 jacks on your HDTV. Use the CURSOR keys to select the type of connection you’ll use in VIDEO INPUT 2. Press ENTER, a blue mark will appear next to the selected option. VIDEO2 SETTING SCREEN SETUP ________________________ Display the On Screen menu and use the CURSOR keys to select Setup. Press ENTER.
ON-SCREEN MENU OPERATION SETUP ______________________ Clock Timer This feature allows you to set a Current Time for your HDTV and enable a Switch On Time for the HDTV to turn on at a specific time of day. When On Timer Function is set to ON, the TV will automatically turn on at the previously set Switch on Time.
ON-SCREEN MENU OPERATION SETUP _____________________ V – Chip (Parental Control) Use this feature to automatically block programs with content you deem as inappropriate for viewing by your children. NOTE: This feature is designed to comply with the United States of America’s FCC V-Chip regulations. Therefore, it may not function with broadcasts that originate in other countries. SETUP V-CHIP SCREEN ADJUSTING THE V-CHIP RATINGS Select ON and press ENTER. Select Adjust (Standard) and press ENTER.
ON-SCREEN MENU OPERATION PICTURE ____________________ Display the On Screen menu and use the CURSOR keys to select Picture. Press ENTER. You may choose between Vivid, Mild, , and Standard, which have predetermined fixed picture parameter values, or choose the Manual option for customized personal settings. NOTE: Each AV input can have its own picture mode (predetermined or manual.) Current input’s selected option is indicated by a blue marker.
PIX SHAPE 4:3 TRANSMISSION 16:9 TRANSMISSION Pix1 Shows a standard definition 4:3 image in its original format, a 16:9 wide image is slightly compressed horizontally. 0 -1 0 0 Fills the entire image on the screen. 1 0 NOTE: A standard definition 4:3 image is stretched horizontally. 0 0 Image is stretched vertically in comparisson with Pix2. 1 0 NOTE: Shows a proportional Zoom for a 4:3 image. 1 1 2 1 1 1 NOTE: Vertical bars are “attached” to the sides of the screen.
ON-SCREEN MENU OPERATION SOUND _____________________ Display the On Screen menu and use the CURSOR keys to select Sound. Press ENTER. Choose an option for your sound settings: Auto – Sound settings are linked to the current Picture option and parameters are adjusted accordingly. Dynamic, Mild, Standard – 3 different predetermined sound parameters not linked with any Picture option.
PC INPUT Use your HDTV as a computer monitor by hooking up your PC or Laptop to the TV with the use of an appropriate monitor cable (not included.) Dot Clock – Adjust the Dot frequency to match your computer’s Dot frequency. Power on the HDTV and any other peripheral equipment before powering on the computer. Phase – Adjust this parameter when the picture appears to flicker or is blurred.
USB INPUT PHOTO VIEWER _____________ AUDIO NOTE: The HDTV switches to USB Input when a USB flash drive is detected. PC INPUT VIDEO INPUT 3 VIDEO INPUT 2 View pictures on your HDTV with the use of a USB mass storage device (not included.) THUMBNAIL VIEW SCREEN NOTE: A thumbnail hide icon will appear if a picture cannot be decoded or if no thumbnail data is available. USB FLASH DRIVE USING THE PHOTO VIEWER Press ENTER on a thumbnail photo to enable the Rotate, Full View and Start Slideshow functions.
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
This product incorporates the following software: 1. the software developed independently by or for Sanyo Electric Co.,Ltd., 2. the software owned by third party and licensed to Sanyo Electric Co.,Ltd., 3. the software licensed under the GNU General Public License, Version 2 (GPL v2), 4. the software licensed under the GNU LESSER General Public License (LGPL) and/or, 5.
GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
For assistance: Visit our Web site: www.sanyoctv.com or call toll free: 1-800-877-5032 We’ll be glad to Help Sanyo Manufacturing Corp. 3333 Sanyo Road, Forrest City, AR 72335 Printed in Mexico SMC, August 2010 Impreso en México SMC, agosto 2010 Imprimé aux.
