ENGLISH ESPAÑOL DP19241 Model No. / No. de Modelo LED HDTV LCD TVHD de LCD 18.5 Owner’s Manual Manual del usuario 47 cmdiagonal / diagonale © 2011 Sanyo Manufacturing Corporation 3FR0321A_En.indd 1 19-Z6AE Part No. / No.
ENGLISH ONE-YEAR LIMITED PARTS AND LABOR WARRANTY THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
TRADEMARKS ENGLISH Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. “As an Energy Star® Partner, Sanyo Manufacturing Corporation has determined that this product meets the EnergyStar® guidelines for energy efficiency.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ENGLISH 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. 1. Place the TV on its back onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fit in only one direction. Hold the unit and attach the stand slowly. LCD PANEL SIDE 2.
Features ENGLISH • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Contents Before using your unit WARRANTY .....................................................2 TRADEMARKS .................................................3 IMPORTANT SAFETY INSTRUCTIONS ...........5 SAFETY PRECAUTIONS .................................7 How to attach the stand ....................................8 How to remove the stand ..................................8 Features............................................................9 Power source ....................................................
Parts and functions Right side ENGLISH Front INPUT/ENTER button MENU button CH (CHANNEL) / buttons VOL (VOLUME) +/– buttons POWER button Remote sensor POWER indicator Red: Standby Green: On To display the menu screen. Press MENU button to display the menu screen. CH (CHANNEL) / buttons, VOL (VOLUME) +/– buttons and INPUT/ ENTER button can be used to select the desired setting during the menu screen operations.
Remote control 1 2 3 10 4 11 5 12 13 6 7 8 9 14 15 16 17 1.POWER Button - Used to turn the power on/off to the LCD TV. 2.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV. 3.– Button -This button is the “–” button used when selecting digital channels. Also can display the current channel number when viewing the program. 4.SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control. / 5.
Antenna connections Combination VHF/UHF Antenna (Single 75 ohm cable) Connect the 75 ohm cable from the combination VHF/UHF antenna to the Antenna Jack. Antenna Jack ENGLISH If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”. 75 ohm Coaxial Cable Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.
Connections to other equipment To connect the TV to a PC (Personal Computer) NOTE: Before connecting any cables, disconnect the AC Power Cords of both the TV and Personal Computer from the AC outlets. 2 (b) RGB DVI JACK Rear of the unit 1 Connect an RGB cable from the monitor output (a) on your PC to the RGB connector on the TV and tighten the screws. (Monitor Cable not supplied.) NOTE: If Computer has only DVI Output (b), a DVI to RGB converter will be required (converter not included).
The Auto Setup menu appears the first time you turn on the TV, and assists you to specify the Air/Cable setting, and program your channels automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! 1 To turn on the TV, press POWER (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.). The Auto Setup function begins.
DISPLAY Quick guide for menu operation When the TV receives a digital signal, the digital information will appear. Call menu and for example: Select Language. Press DISPLAY to display the current information on the screen. 62-1 HDTV Moving Picture1 CH-1 Digital TV-MA Air Sleep Timer Off English No Program Information is available 1 2 Press INPUT SELECT to select TV mode. Press MENU. The TV menu screen will appear.
Convenience functions You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the left of the menu - follow the On-Screen prompts to set your preferences.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode.
Clear All CH Ch Label 1 2 3 Select “Channel”, then press Channel Number Ch Label Label Clear or ENTER. Press or or ENTER. to select “Add/Delete”, then press Press or or ENTER. to select “Clear All”, then press 4 Adding Channel Add/Delete Clear All >> >> >> Press or repeatedly until the character you want appears in the first space. Channel Number 15-1 Ch Label Label Clear CH-1 >> :Select :Select ENTER :Set or - or ENTER. to select “DTV Signal”.
Setting the V-Chip Genre: D L S V FV An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. Movie Rating Movie Rating G PG PG-13 R NC-17 X To register a password 1 2 Select “Lock”, then press or ENTER.
6 7 Press or to set “V-Chip” to “On”. Press or to select “V-Chip Set (DTV)”, then press or ENTER. If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed. Set your preferred content rating limits for the additional rating system. You also need “Update” procedure to update rating information. NOTE: • You can only download the additional V-Chip rating system when your TV is receiving a digital signal.
5 6 Press or to select “CC Advanced”, then press or ENTER. The CC Advanced menu will appear. Press press or to select the desired item, then or to change the setting. Auto Text Type Auto Text Edge Auto Text Color Auto Text Opacity Auto Background Color Auto Background Opacity Auto :Select Cinema Wide1 (for 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio.
Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS TV does not operate. • • • • • Poor sound or no sound. • • • • Poor picture • or no picture. • • • Poor reception on some channels. • • • • Poor color or no color. • • • • Picture wobbles or drifts.
GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: Type: Display method: Number of Pixels: Broadcasting system: Receiving channels: Tuner type: Inputs: Output: Speaker: Audio output power: ACCESSORIES AC 120V 60Hz Operation: 24W Stand by: 0.3W 2.6 kg (5.7 lbs) Width: 450 mm (17-11/16 inches) Height: 337.5 mm (13-5/16 inches) Depth: 168 mm (6-5/8 inches) 5˚C - 40˚C Less than 80% RH 47.01 cm (19” class/18.
