User manual

4
Lens Adjustment
Adjusting focus
NEAR
FAR
SET
󱐻󱐿󱐽
󱐻
Roughly focus the subject using NEAR/FAR buttons.
Make adjustment while watching the monitor.
󱐽
Press the SET button.
The camera automatically focuses on the subject. Note that the color of the status
indicator 󱂈 “FOCUSING” turns from black to orange.
The status indicator 󱂈 changes to “ERROR” when the subject cannot
automatically come into focus.
In this case, manually adjust the focus. (
Electronic manual)
󱐿
Press the NEAR/FAR button to adjust the focus.
Make adjustment so that the FA bar gauge 󱂉 indicates the highest level.
When the subject comes into focus, the color of the status indicator 󱂈
“FOCUSING” changes from black to orange.
Pressing the buttons moves the FB bar gauge 󱂊.
The position changes step by step each time the button is pressed
and continuously at a high speed when the button is held down.
󱑁
Press the SET button for 2 seconds or more.
The focus adjustment screen will close.
The focus adjustment screen will also close automatically if left idle
for 5 minutes or more.
VDC-HD3500P/HD3500/HD3300P/HD3300:
If video is out of focus in either color or black-and-white mode,
adjust the focus in respective modes.
•
•
■