Cordless Telephone - Cordless Phone User Manual

27
HANDSET SPECIAL FEATURES
In addition to the basic functions, your handset also has a number of special
features.
Phone setup
To set the dial mode:
If you have Touch-Tone service, do nothing as your phone has been set to Tone
prior to shipment. If you do not know which type of service you have, contact
your local telephone company.
1. Touch
and select the PHONE SETUP menu and then the DIAL MODE
submenu.
2. Use
or to select ‘PULSE’ or ‘TONE’.
3. Touch
to conrm.
To change ash time:
1. Touch
and select the PHONE SETUP menu and then the FLASH TIME
submenu.
2. Use
or to change selected ash time (100, 270, 300 or 600ms).
3. Touch
to conrm.
Smart key lock and manual key lock
Smart Key Lock prevents the accidental activation of keys during a call. A sensor
inside the top of handset where the receiver is located senses when your ear
touches the receiver and automatically locks the keypad. To ensure the Smart
Key Lock function is activated, make sure to place the handset receiver to your
ear rst before speaking into the handset microphone and avoid touching the
keypad with your ngers until the handset receiver rests on your ear. Smart Key
Lock will disengage as soon as you remove the handset receiver from your ear.
A manual key lock can also be activated to prevent the accidental triggering of
keys during standby mode or sleep mode.
To activate / deactivate manual key lock:
• In standby mode touch then immediately touch . will appear to
indicate key lock is activated. To deactivate manual key lock, touch
then
immediately
.
NOTE:
• When the keypad is locked, Only the
key functions and the emergency
call (911) can be made, enter the emergency number and touch
directly.