Operation Manual

English - 20 -
Country
WARNING!
All Prestored Programs
will be deleted
UK
Ok
Cancel
Auto Program
A.P.S. (Auto Programming System) Country
Press / button to select your country. If you
want to exit from A.P.S. function, press the
BLUE
button.
When you press OK or RED button for starting APS,
all stored programs will be erased and the following
screen will be displayed:
UK
P 03 - C 04
63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
Whenever you press the “BLUE” button, A.P.S. func-
tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is
displayed with the programmes found and located.
Program
By pressing
/
button, select Program. Press
/ button to select the program number. Youou
can also enter a number via digit buttons on the re-
mote control. There are 100 program storage between
0 and 99.
Band
Band can be selected either “C” or “S” by press“ ” /
button.
Channel
Channel can be changed by ” / button or Digit
Buttons.
Colour System
By pressing
/
button, select Colour System.
Press / “ button to change the colour system
to PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not available for
the Colour System.
Note: In EXT mode, you can choose NTSC 3.58 and
NTSC 4.43 as well.
Sound System
By pressing
/
button, select Sound System.
Press
” / button to change the sound system
to BG, I, L, L’, DK.
Fine Tune
By pressing
/
button, select Fine Tune. Press
” / “ ” button to adjust the tuning.
Search
By pressing
/
button, select Search. Press
/ “
” button to start program searching.You can also
enter the desired frequency via digit buttons when
search item is highlighted.
Store
By pressing
/
button, select Store. Press
”or “OK” button to store the adjustments. “Stored...”
will be displayed on the screen.
Install menu in AV modes
The following screen appears in the install menu:
INSTALL
Colour System
VCR
Store
ENG-37781W-1050UK-37 INCH 17MB22 UK IDTV-(2 HDMI-BASIC PIP-SPDIF)(C2)-50115146.p6503.09.2007, 08:2220