INSTRUCTION MANUAL CES37WSD7-B Colour television Please read this Instruction book before using your television. We wish you many hours of pleasure from your new television.
Contents Remote Control Buttons .............................................................................................................................. 2 LCD TV ....................................................................................................................................................... 2 Preparation ................................................................................................................................................. 3 Safety Precautions ...........
Remote Control Buttons = Stand By 31 = Cursor Right 29 0 - 9 = Direct Programme DTV OK Yellow button = Feature Menu Blue button = Installation Menu / 27 = TV / DTV AV /SOURCE = External Source = Hold / PIP Position = Update, = PAP Mode = Index Page GUIDE= Electronic Programme Guide (EPG) =Reveal / Switch from TV to PC 4 INFO SELECT P + = Programme Up = Volume Up M 28 -/-- / EXIT = No function TV 2 3 30 = Info + 1 32 = Cursor Up ABC DEF GHI 1 2 3 JKL MNO PQR 4 5 6 STU
• PC Input Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in moderate climates. • Plug&Play for Windows 9X, ME, 2000, XP • Audio Line Out • PIP, PAP, PAT is available. Safety Precautions Please read the following recommended safety precautions carefully for your safety. 10 cm The TV set should be operated only from a 220-240 V AC, 50 Hz outlet.
7. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. 8. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock, or other hazards. 9. Servicing Please refer all servicing to qualified personnel.
Before Switching On Your TV Power Connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Connections To The Aerial Input Socket • Connect the aerial or cable TV plug to the Aerial input socket located at the rear of the TV and connect the cable plug coming out from the TV out socket located on the devices (VCR, DVB etc.) to this socket as well.
Initial Settings When the TV is turned on for the first time, it is in the digital mode. Because this is the first time the TV is used, there are no channels stored in the memory and the following message appears on the screen. Country Language TXT Language Please ensure aerial is plugged in. Do you want to start first time installation? Yes PLEASE CHECK ANTENNA CABLE AUTO PROGRAMMING SYSTEM No • To start installation process, select “Yes”, to cancel select “No”.
Basic Operations Everyday Operation You can operate your TV using both the remote control and onset buttons. Operation with the buttons on the TV Volume Setting • Press “ ” button to decrease volume or “ ” + button to increase volume, so a volume level scale (slider) will be displayed at the middle of the bottom on the screen. Programme Selection • Press “P+” button to select the next programme or “P-” button to select the previous programme.
• If you press “INFO” button you can see the detailed help information easily. And by pressing “INFO” button again you can exit Help menu. Rolling national and international news including breaking news as it happens, business updates, sports results and weather summaries. 51 BBCi Channels Current Programme Next Programme 30. CBBC Channel 40. BBC NEWS 24 41. ITV News 50. Four Text 51.
Digital teletext is sometimes broadcast at the same time as normal broadcasting. 1. Press the The IDTV menu can only be shown when watching Digi- button. tal terrestrial broadcasting. Press the “ TV DTV ” button to turn IDTV on while TV is in analogue mode. The digital teletext information appears. 2. Operate it with the coloured buttons, buttons and OK button. IDTV Menu System / / / Press the "M" button.
To watch a specific channel, highlight it using or button and then press “SELECT” button, while the “Select” item on Channel List menu is highlighted by using or button. Then the name and number of the selected channel will be displayed in the top-left and top-right of the channel display at the top-right of the screen, respectively. Deleting the channels in the channel list Press or deleted.
Setting Favourites This menu includes the following items: You can set various channels as favourites so that only the favourite channels are navigated. To set a favourite you should highlight the “Favourites” item at bottom of the Channel List menu. or button to highlight the “Favourites” Use the item at the base of the screen and then, in turn, highlight each channel you want to add to the favourites list, and buttons (or using the press the “SELECT” button.
Press the “OK” button to start installation. After search is completed for digital channels, a message asking search for analogue channels appears on the screen. Do you want to searc h for analogue c hannels? Yes Configuration Press the "M" button to display the Main Menu and button twice to highlight Configuration, then the press the “SELECT” button to display the Configuration menu. Press the "M" button to leave the menu. No Main Menu Press the “OK” button to search for analogue channels.
Favourite mode This function enables or disables the favourite channel list mode. See Channel List menu Favourites on page 13. or button to turn on/off favourite mode. If Use the “Favourite Mode” is on, in normal operating mode pressing “P+” and “P-” buttons will only navigate through the channels that were previously defined as favourites in Channel List. EPG Preference Digital terrestrial television channels can broadcast simultaneous Next&Now and 7-Day electronic programme.
Timers You can set a timer to switch the TV to any channel without your intervention. This is also for making video recordings of programmes when you are out. Display the Main Menu by pressing the "M" button. or button Highlight the Timers line by pressing and press the “SELECT” button to display the Timer menu. Main Menu • The channel name is set using the or button to display the channel which broadcasts the programme.
TV Setup To be able to go through TV functions, you can use this item. The digital TV Setup menu screen is accessed from the main menu. Press the "M" button to display the or button to highlight “TV main menu and use Setup”, press the “SELECT” button to display TV Setup menu screen. Main Menu Channel List Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay channel company, then insert those to the Television using the following procedure. 1.
3D Comb is used to improve colour transitions and colour quality of pictures. Analogue TV Menu System Picture Menu By pressing / button, select 3D Comb. Press / button to set this feature On or Off. Note: 3D Comb feature is not functional in NATURAL picture mode. Picture Zoom PICTURE By pressing / button select Picture Zoom. Use / buttons, to change picture zoom to Auto, 16:9, 4:3, Panaromic, 14:9 Zoom, Cinema, Subtitle or Zoom.
Features Menu Balance By pressing / select Balance.Press / button to change the level of the balance.Balance level can be adjusted between -32 and 32. Headphone FEATURE By pressing / button, select Headphone. Press button to enter hedphone menu. PIP volume PAP By pressing / button, select Volume. Press button to increase hp volume level. Press button to decrease hp volume level. Headphone volume level can be adjusted between 0 and 63.
PIP Position PAP Picture Select PIP Picture item by using “ / ” button. Use Press “ ” button to enter “PAP Picture” submenu. Adjustments of Contrast, Brightness, Sharpness, Colour, Reset and Store items in this part are identical with “Picture” menu in the Menu System. Refer to “Picture” menu explanations in the previous parts. “ ” / “ ” button to adjust PIP position. PIP Position info will be displayed at the bottom of the menu OSD. PIP Source Select PIP Source item by using “ / ” button.
• If currently watched source is analogue TV, a connected device displays analogue TV source as well. If this source is set to digital mode, connected device displays digital source. In order to avail this function, EXT-2 Output should be set to TV/DTV. Program Table By pressing / button, select Program Table. Press “ ” to display Program Table. Program Table PC Audio In By pressing / select Pc Audio In.
Band Auto Program Band can be selected either “C” or “S” by press“ button. “ ”/ Channel Channel can be changed by “ Buttons. Country ”/“ ” button or Digit Colour System By pressing / button, select Colour System. Press “ ” / “ ” button to change the colour system to PAL, SECAM, PAL60 or AUTO. WARNING! All Prestored Programs will be deleted If Sound System is set to I, SECAM is not available for the Colour System. Ok UK Note: In EXT mode, you can choose NTSC 3.58 and NTSC 4.43 as well.
Colour System By pressing / select Colour System. By press- ing “ ” / “ ” button, you can change the colour system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58 or AUTO. VCR By pressing / select VCR. By pressing “ “ ” button, you can set the VCR to ON or OFF.. ”/ Store By pressing / button, select Store. Press “ ”or “OK” button to store the adjustments. “Stored...” will be displayed on the screen. Source menu By pressing “ ” / “ ” button, select the fifth icon.
H (Horizontal) Position Press the “ This item shifts the image horizontally to right hand side or left hand side of the screen. • Select H Position item by using / button. • Use “ ” / “ ” button to adjust the value. V (Vertical) Position This item shifts the image vertically towards the top or bottom of the screen. • Select V Position item by using / button. • Use “ ” / “ ” button to adjust the value.
• For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the Full mode to restore the picture to its original shape. Cinema: This zooms up the wide picture (16:9 aspect ratio) to the full screen. The top and bottom of the picture are slightly cut off. Freeze Picture You can freeze the picture on the screen by pressing the “OK” button. Note: This feature will be unavailable to be used while watching PC, YPbPr, HDMI-1 and HDMI-2 sources.
• Time information will be displayed on screen after pressing “ ” button.If the programme does not have teletext transmission, no information will be displayed. • When ” ” button is pressed while in teletext mode, the screen will be splitted into two windows, one displaying the teletext and the other displaying the current channel.
Playback NTSC Tips • Connect NTSC VCR player to a Scart socket of the TV. Care Of The Screen Copy Facility Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Source selection for VCR recording. Poor Picture • Select Feature menu. Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.
Specifications TV BROADCASTING PAL/SECAM B/G D/K K' I/I' L/L' RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS 100 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50Hz AUDIO German+Nicam Stereo AUDIO OUTPUT POWER (WRMS.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768, frequency range of 56-75 Hz. The following table is an illustration of some of the typical video display modes. Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 Resolution Frequency Horizontal Vertical Hor.(kHz) Ver.
Peripheral Equipment Connections S-VHS Input SCART 2 Video Input SCART 1 Audio Inputs s Component Audio Inputss Headphone Component Video Inputs (YPbPr) Audio Line Outs s RF Spdif Coaxial Output PC Audio Input HDMI Input 2 HDMI Input 1 PC Input CI Slot For Service Use Only Power cable Note: Because FAV CVBS and SVHS Y are connected parallelly, the picture may blend if the two peripherals are used at the same time.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
THE GUARANTEE The seller of this equipment (the vendor) warrants to the initial retail purchaser that if the equipment becomes defective, and the defect is shown to be due to faulty materials or workmanship within a period of 12 Months from the date of sale to the original purchaser it will be repaired (or at the vendors sole option) replaced free of charge, always providing that: The equipment has at all times been used in accordance with the operating instructions issued by the manufacturer, and has not b
