Operation Manual

English - 29 -
menu, Common Interface then pressing the
OK button. (CAM set up menu is not
displayed when it is not required.)
• To see the viewing contract information: enter
IDTV; press the M button, then highlight
Common Interface and press the OK button.
• When no module is inserted, “No Common
Interface module detected” message
appears on the screen.
• Refer to the module instruction manual for
details of the settings.
Menu System
Picture Menu
Mode Dynamic
Contrast 63
Brightness 63
Sharpness 31
Colour 99
Colour Temp Normal
Noise Reduction Low
Film Mode Off
Store
Reset
PICTURE
NO SIGNAL
Mode
For your viewing requirements, you can set
the related mode option.
Press
or button to select Mode. Press
or button to choose from one of these
options: Cinema, Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/
Hue
Press or button to select the desired
option. Press

/

button to set the level.
Note: Hue option can only be visible when
the TV receives an NTSC signal.
Colour Temp
Press or button to select Colour Temp.
Press

/

to choose from one of these
options: Cool, Normal and Warm.
Note:
• Setting Cool option gives white colours a
slight blue stress.
• Setting Warm option gives white colours a
slight red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture
is noisy, use Noise Reduction setting to
reduce the noise amount.
Press
or button to select Noise
Reduction. Press

/

to choose from one of
these options: Low, Medium, High or Off.
Film Mode
Films are recorded at a different number of
frames per second to normal television
programmes.
Press
or button to select Film Mode.
Press

/

button to set this feature On or Off.
Turn this feature on when you are watching
films to see the fast motion scenes clearly.
Store
Press or button to select Store. Press

or OK button to store the settings. “Stored”
will be displayed on the screen.
Reset
Press or button to select Reset. Press

/

or OK button to reset the picture modes to
factory default settings.
ENG-47751W-MB26 UK IDTV-1050UK-(WSUB-ALO-2SCRT)(3D PANORAMA)(ECO PIP)(C2)-50110360.p6506.07.2007, 22:1829