CRT Television User Manual
7
DS
Screen mode selector
To select the screen mode, AUTO, NATURAL, 
ZOOM14:9, TITLE IN 14:9, ZOOM 16:9, 
TITLE-IN 16:9, FULL or NORMAL. 
TV/AV switch
To switch from Digital TV, AV1, AV2, AV3 or 
AV4 mode press repeatedly. 
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons  for example
for channel 23, press 2 and 3 numeric 
buttons.
OK 
To save the setting in the menu, or to call up
the All channel table.
MENU
To switch on the screen display menu on/off.
See page 8. 
Subtitle
Displays sub titles On and Off.
You may need to switch to title in by pressing 
WIDE button. See page 20.
INFO
Shows the current and next programme on 
the selected channel. (refer to page 13).
Picture mode selector
To access a series of picture modes: 
PERSONAL, STANDARD, and 
DYNAMIC. 
Sound mute
To switch the sound from the speakers. 
The sound changes as follows; 
Normal volume -> Half volume -> Mute
Programme up and down
To select the next programme number or
previous programme number.
Volume up/down
To adjust the sound level. 
Bass selection
To get an emphasised bass sound, ON or OFF. 
Standby/Power on/off
To switch the TV on and off. Also see page 19.
Cursors 
To select the sub menu items in the 
menu display, Up, Down, Left, Right. 
Guide
To call up the Digital TV schedule guide display on 
the screen. (refer to page 13).
Surround mode selector
To select the surround mode, ACTIVE,
MONO or OFF.
System selector
To select the colour system in the AV mode, 
AUTO,PAL or NTSC.
D/A selector
To switch between analogue and digital channels.
Return
Returns back to previous screen in menu.
Exits interactive mode.
Coloured buttons
Some channels have interactive services.
Use the red button to enter and other colours as 
directed. Also used in menu functions.
Digital Shot button
Press to capture up to 12 pictures and view
using the CS button. 
CS button
Press button to display digital shot pictures and to 
enter and exit the Album.
REMOTE CONTROL
REMOTE CONTROL
- Digital Use
- Digital Use










