User's Manual
37
Choose or
by pressing the COMPONENT or
the COMPUTER 1 button on the remote control. Choose by pressing the HDMI button on the
remote control or you can press the INPUT button on the top control to choose the desired input
source.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1
2
UsethePoint▲▼buttonstoselect
Computer 1 and then press the Point ►
button.
, Scart,
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/
COMPONENT IN terminal with a
COMPONENT-VGA Cable, select
Component.
Component
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/
COMPONENT IN terminal with
a Scart-VGA Cable, select
.
Press the MENU button to display the
On-ScreenMenu.UsethePoint▲▼buttons
to select and then press the Point ►
button or the SELECT button.
When the Input search function is set to On 1 or On
2, the input signal will be searched automatically
(p.45).
3
UsethePoint▲▼buttonstoselect
Component or and then press
the SELECT button.
Direct Operation
Menu Operation
PressthePoint▲▼buttons
to select Component or
.
When video input signal is
connected to the HDMI jack,
select .