User's Manual

36

Choose  or  by pressing the
INPUT button on the top control, or the VIDEO or
the S-VIDEO button on the remote control.
Before using these buttons, correct input source
should be selected through menu operation as
described below.
1
2

,
Direct Operation
S-video

When the Input search function is set to On 1 or
On 2 in the Auto setup function, the input signal
will be searched automatically (p.45).


Press the MENU button to display the
On-ScreenMenu.UsethePoint▲▼buttons
to select  and then press the Point ►
button or the SELECT button.
UsethePoint▲▼buttonstoselectVideo
or S-video, and then press the SELECT
button.

Video
S-video
Menu Operation
When video input signal is
connected to the S-video jack,
select S-video.

When video input signal is
connected to the Video jack,
select Video.
Video
