User's Manual


35

Select . The On-Screen Menu
disappears and  appears. Press the
SELECT button to expand the image size. Use
thePoint▲▼◄► buttons to pan the image. The
Panning function can work only when the image is
larger than the screen size. A projected image can
bealsoexpandedbypressingtheD.ZOOM▲or
the SELECT button.
To exit the Digital zoom +/– mode, press any
button except the D.ZOOM
▲▼
, SELECT and
Point buttons.

Select . The On-Screen Menu
disappears and  appears. Press the
SELECT button to compress image size. The
projected image can be also compressed by
pressing the D.ZOOM
▼
or the SELECT button.

To return to the previous screen size, select a
screen size from the Screen Size Adjustment
Menu or select an input source from the Input
Source Selection Menu (see page 27) again, or
adjust the screen size with the D.ZOOM
▲▼
buttons.

• Theminimumcompressionratioislimited
depending on the input signal, when the Keystone
function is working or when the custom is selected
for the screen size.
 •  and  are disabled and
cannot be displayed when 480i, 575i, 480p 
720p,1035i or 1080i is selected in the PC System
Menu (p.28).
 •  cannot be selected when  is
selected.
 • Theminimumcompressionratioislimitedat
Normal screen size.
 • Whenthe16:9functionisselectedonScreen
aspect menu, Wide (16:9) is not available in the
PC and AV screen (pp.34, 47).


▲





▼

When this function is set to On, the picture
will be top/ bottom and left/right reversed. This
function is used to project the image from a
ceiling-mounted projector.
Ceiling
When this function is set to On, the picture will
be left/right reversed. This function is used to
project the image from rear of the screen.

To reset the adjusted data, select Reset and
press the SELECT button. A confirmation box
appears and then select Yes. All adjustments will
return to their previous figures.


This function is used to adjust keystone
distortion of the projected image. Use the Point
▲▼ buttons to choose the item you want to
adjust.

To correct keystone distortion, press the
SELECT
button.
Keystone appears on the screen. Use the
Point ▲▼ buttons to correct keystone
distortion (p.23).
Store
To store or reset the keystone correction,
press the Point ► button.
Store .......... Keep the keystone correction
even when the AC power cord is
unplugged.
 .......... Release the keystone correction
when the AC power cord is
unplugged.

Ceiling

Screen aspect
This function is used to project the image to a
4:3 or 16:9 projection screen.
 ....16:10 is the aspect of the
LCD panel. The original
Screen Menu is available.
 ..... Set to a 16:9 projection
screen.

......Set to a 4:3 projection screen.