User's Manual
33
Press the MENU button to display the
On-ScreenMenu.UsethePoint▲▼
buttons to select and then
pressthePoint►buttonortheSELECT
button.
1
2
UsethePoint▲▼buttonstoselectthe
desired item and then press the SELECT
button to display the adjustment dialog box.
Use the Point ◄► buttons to adjust the
setting value.
•WhenWhitebalance, or Blue is
adjusted, Color temp. will change to .
•When or
is selected in Image select, Color temp. will
change to or .
Press the Point ◄ button to decrease the
contrast, press the Point ►button to increase the
contrast (from 0 to 63).
Press the Point ◄ button to decrease the
brightness, press the Point ►button to increase
the brightness (from 0 to 63).
Contrast
Press the Point ◄ button to lighten R/G/B tone,
press the Point ► button to deepen R/G/B tone
(from 0 to 63).
Use the Point ◄► buttons to select the desired
Color temp. level (, Low, Mid, or ).
Color temp.
Use the Point ◄► buttons to adjust the gamma
value to obtain a better balance of contrast (from
0 to 15).
Press the Point ◄ button to decrease the
sharpness of the image, press the Point ►
button to increase the sharpness of the image
(from 0 to 15).
To reset the adjusted data, select and
press the SELECT button. A confirmation box
appears and then select . All adjustments
will return to their previous figures.
Use the Point ◄►
buttons to adjust the
setting value.
Selected Image mode
Store
To store the adjusted data, select Store and
pressthePoint►ortheSELECTbutton.Use
thePoint▲▼buttonstoselectonefrom
1 to and press the SELECT button.
A confirmation box appears and then select
. Stored data can be called up by selecting
an in the Image Mode Selection on
page 32.
A confirmation box appears
and then select .
Store